Oki 6200E manual FTP Printing, Put

OkiLAN 6200e Plus User’s Guide

Note: The Remote LPD implementation of the Net- work Print Server does not support any UNIX LPD input or output filters or the direct printing of ban- ner pages. It is possible to configure some UNIX systems so that banner pages and input and out- put filters will be generated at the UNIX host and then sent to the Network Print Server. (Refer to Application Considerations.)

FTP Printing

FTP is a command line program used to transfer files between computers. FTP provides commands for opening a connection to another computer, specifying the data type of any transfers, and sending and receiv- ing files. The Network Print Server supports a subset of the FTP command set. This subset allows the FTP user to open a connection to the Network Print Server, specify a file transfer data type and send print files to a Remote Print Queue Name on the Network Print Server.

The Network Print Server recognizes the following FTP commands:

PUT

Print a single file. The PUT command sends the file to the Network Print Server. The first parameter of the PUT command is the name of the local file to PUT. The second parameter of the PUT command is the name of the file for the remote PC. In order to print the file, this second parameter must be a Remote Print Queue Name. If you do not specify the second param- eter, FTP sets the remote file name to the local file name. This may produce undesirable printing results.

TCP/IP 94