OkiLAN 6200e Plus User’s Guide

TCP/IP

Introduction

TCP/IP Overview

This section contains instructions and information on how to configure your Network Print Server. You will also be instructed on how to set up your host comput- ers to print to the Network Print Server using the TCP/ IP protocol.

The Network Print Server supports TCP/IP methods for printing:

Remote Line Printer Daemon (LPD)

File Transfer Protocol (FTP)

Printing directly through a TCP port (Raw Port Printing)

Additionally, if the DHCP protocol is enabled as a default, the print server may be accessed through an ordinary Internet Web browser, such as Netscape Navigator, or by using TELNET.

Software Requirements

The Network Print Server may be configured for TCP/ IP using the OkiNet for TCP/IP utility, or from a com- puter supporting the OkiNet for NetWare utility, or TEL- NET and one of the following:

Manual arp table entry and ping

Static route entry using route add command

DHCP

TCP/IP

79

Page 79
Image 79
Oki 6200E manual TCP/IP Overview, Software Requirements