Oki 6200E manual Prerequisites

OkiLAN 6200e Plus User’s Guide

Prerequisites

Before you proceed, the following prerequisites must be met. Most of the time, steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails!

1.The name OKIPRINTER and the IP address assigned to the Network Print Server are in the “/ etc/hosts” file on the HP-UX system.

2.Make sure the rlp process is not running by typing at the UNIX prompt: ps -e grep rlp If rlp is not running, you will not see any output after executing this command. If rlp is running (that is, if you see output after executing this command), kill the pro- cess with the command: kill -15 process_number

3.Make sure the following entry is in the “etc/ inetd.conf” file: printer stream tcp nowait root / usr/lib/ rlpdaemon rlpdaemon -IIf the rlp daemon is not running when a print request is made, this entry in “/etc/inetd.conf” tells inetd to auto-start the rlp daemon to service the pending print request. This is helpful if the daemon was terminated for some reason. For more information on inetd or “/ etc/inetd.conf”, type man inetd or man inetd.conf.

4.Make sure the following entry is in the “/etc/ser- vices” file printer 515/tcp spooler

5.Start inetd by typing the following at the UNIX prompt: /etc/inetd -c

TCP/IP 146