Oki 6200E Localprintqueuename, NetworkPrintServername, Remoteprintqueuename, Pathtospooldirectory

OkiLAN 6200e Plus User’s Guide

The entry should be similar to the following:

local_print_queue_name[printer_model _and_manufacturer]:\:lp=:mx#0:rm=Netw ork_Print_Server_name:\:rp=remote_pri nt_queue_name:\:sd=path_to_spool_dire ctory:lf=just log_file_name

local_print_queue_name

The local_print_queue_name defines the name of the printcap entry. It is used by the lpr/lpd utilities to spec- ify which printcap entry is being referenced. Additional printcap entries can be added as needed for different queue types. Each entry must have a unique local_print_queue_name and a different spool direc- tory to work properly. When you are ready to print, use the local_print_queue_name that matches the data type of the file to be printed.

Network_Print_Server_name

This is the name (alias) of the Network Print Server. This must be the same name as entered in the /etc/ hosts file or your NIS or DNS system. An IP address may also be used here.

remote_print_queue_name

The remote_print_queue_name entry determines the Network Print Server port where the print job will be printed and optionally specifies ASCII printing.

path_to_spool_directory

This is the path to a directory where the print jobs will be spooled for this queue. You must create a unique spool directory for each printcap entry.

TCP/IP 92