Oki 6200E manual Network Preparation, Before You Start

OkiLAN 6200e Plus User’s Guide

•RARP

•BOOTP

Network Preparation

•You should be familiar with network administration as well as the physical setup and operation of your network.

•Advise users of possible disruption during installa- tion.

•Make sure the serial number and Ethernet address of your Network Print Server are available—print a Configuration Sheet by pressing and holding the Test button below the Ethernet connection on the Network Print Server.

•Assign an IP address and a hostname (alias) to the Network Print Server.

•Use the network name service or the “/etc/hosts” file to add the Network Print Server to the network.

Before You Start

Before running OkiNet for TCP/IP, you must do the fol- lowing:

•If necessary, install the Network Print Server hard- ware and connect the cabling. Instructions for hardware installation are found in your printer User's Guide.

•Press the Test button on the print server to print a Configuration Sheet. This printout contains infor- mation about the Network Print Server that you need to complete the installation.

TCP/IP 80