Oki 6200E Specify Print Server IP Address Option, Specify the Subnet Mask for Your Network Option

OkiLAN 6200e Plus User’s Guide

***Specify Print Server IP Address (Option 3)

This option allows you to select the method the Net- work Print Server uses to obtain its IP address or to set a permanent IP address. If the Network Print Server has been configured to use a permanent IP address, a DHCP, RARP or BOOTP server does not need to be available when the Network Print Server is powered on.

If you change the IP address, the change remains undetected until the Network Print Server is reset or is powered off and on.

Remember, when choosing a permanent IP address:

•The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.

•If you select an invalid IP address you may not be able to access the Network Print Server.

•You can also use OkiNet for TCP/IP or OkiNet for NetWare to set a permanent IP address.

Note: If you select an invalid IP address you may not be able to access the Network Print Server. Use this option with care!

Specify the Subnet Mask for Your Network (Option 4)

If your network environment includes subnets, you will want to set the subnet mask.

The subnet mask must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.

TCP/IP 124