Oki 6200E manual Running Install, Completing the Installation

OkiLAN 6200e Plus User’s Guide

Note: The directory where OKI DLL files install, c:\OS2\DLL, must be the first entry in the LIBPATH command located in the CONFIG.SYS file. When you reboot the system, the OS/2 spooler will load the OKI Network Printer Redirector.

Running INSTALL

1.Login to the server with administrator privileges. If you are reinstalling the utility, disable the spooler before running install. If this is the first time you have installed the utility, disabling the spooler is optional.

2.From the OS/2 command line, change to the OS/2 directory.

3.Check the README file for current installation notes.

4.Type INSTALL and press Enter.

5.Verify the install directories are correct.

6.Select INSTALL to proceed. When the utilities are installed, you will see a message indicating that the installation was successful. If the install was not successful read through the comments in the Install Progress window for errors and recom- mended action.

7.Select Exit.

Completing the Installation

After the OKI software has been installed, you must do the following:

1. Verify the OS/2 spooler is enabled.

LAN Manager/LAN Server 170