Oki 6200E manual Unable to Print from a Macintosh

OkiLAN 6200e Plus User’s Guide

•Verify that the AppleTalk type is LaserWriter.

•Verify that the Network Print Server has passed self-test. The status indicator should be solid green.

•Check the connections between the Network Print Server and the Macintosh. When the Network Print Server does not appear in the Chooser, it is often caused by a cabling problem.

•Verify EtherTalk Phase 2 is selected in the Control Panel.

Unable to Print from a Macintosh

If you are unable to print from a Macintosh via the Net- work Print Server, try the following:

•Verify the Network Print Server appears in the Chooser as a LaserWriter device. If the Network Print Server does appear in the Chooser, make certain it is selected.

•Make sure you are using System and Finder ver- sion 6.02 or later and LaserWriter driver version 8.0 or later.

•Verify the printer supports PostScript Level 2 via the printer test/ configuration sheet.

•If the status message Printer Error: Bi-Di communi- cation on printer’s parallel port is not enabled appears, verify your printer’s parallel port is a bidi- rectional port and is enabled.

Troubleshooting 192