Oki 6200E manual Hardware Error Messages, OkiNet for TCP/IP-Winsock Errors, ST Cable not connected

OkiLAN 6200e Plus User’s Guide

•If you are able to ping to the Network Print Server, but are unable to telnet, the IP address is probably being shared with another device that does not support telnet.

OkiNet for TCP/IP—Winsock Errors

•If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the host’s file in the Windows directory (check the documentation for your Windows TCP/IP stack).

•If you have difficulty seeing a particular Network Print Server, try moving the device onto the same subnet as the computer running the utility.

•If OkiNet for TCP/IP gives you the Winsock error: “Could not bind to socket,” use the Special Options dialog under the File menu to change the Discov- ery UDP Port to a different port number.

Hardware Error Messages

ST: Cable not connected

Self test has determined that the network cable is not connected.

•Check the cable connection to the Network Print Server.

•Move the Network Print Server to another known working node.

If you find the cable is connected and you are still receiving this message or any other “ST:” error mes- sage, power cycle the Network Print Server. If the error continues, call Oki Data Customer Support at 1- 800-OKI-DATA (1-800-654-3282).

TCP/IP 132