Oki 6200E manual Prerequisites

OkiLAN 6200e Plus User’s Guide

Configuring SCO UNIX for Printing with the Network Print Server

This application note describes the configuration of the printing system on the Santa Cruz Operation’s (SCO) version of the UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts.

•lj4 - The local queue name of the SCO system to which print jobs that are destined for a printer attached to the Network Print Server will be directed.

•OKIPRINTER - The host name of the remote sys- tem which is the Network Print Server. For exam- ple, to telnet to the Network Print Server and invoke the Network Print Server Configuration util- ity, you would type telnet OKIPRINTER. A host name is not required for the Network Print Server, the IP address may be used.

•yourqueuename - This is the name of the queue on the Network Print Server and must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. For more information, see Remote Print Queue Names.

Prerequisites

Before you proceed, verify that the following prerequi- sites are met:

1. SCO TCP/IP version 1.2 or later must be installed.

TCP/IP 156