OkiLAN 6200e Plus User’s Guide

Add

Select the Add button to define access to a new Net- work Print Server or a group of print servers. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255. Use * to specify groups/subnets.

Example:

To add a single Network Print Server, enter 198.168.42.24. To add a group of print servers, enter 198.168.42.*.

Delete

The Delete button deletes a Network Print Server access entry in the IP address.

Configuring the Discovery UDP Port Number

In order to discover Network Print Servers on the net- work, OkiNet for TCP/IP communicates with the print servers on a UDP port number. Normally, using this port number should not interfere with other devices on the network. If there are problems using the given port number, select a new number.

Note: Windows NT will not permit the use of Port 9 for discovery. Select one of the other available ports.

Starting a Telnet Session

A simple telnet interface has been provided to commu- nicate with devices supporting telnet. A telnet session can be started by selecting the Network Print Server from the print server list and choosing the Telnet Ses-

TCP/IP

120

Page 120
Image 120
Oki 6200E manual Configuring the Discovery UDP Port Number, Starting a Telnet Session