Oki 6200E manual Troubleshooting, Main Status Indicator

OkiLAN 6200e Plus User’s Guide

the TCP/IP protocol to factory defaults. If you reset the Network Print Server while a job is printing, the job may not print successfully.

Troubleshooting

Main Status Indicator

Upon power-up, the main status indicator flashes orange. It changes to green when the Network Print Server passes self test. The indicator stays orange if the Network Print Server fails self test. If the indicator turns solid orange due to an error, a configuration sheet prints automatically. Check the error message reported on the configuration sheet.

Restoring the Network Print Server to Factory Defaults

In most cases, the best way to restore the Network Print Server to factory defaults is via telnet. However, if you are unable to connect to the device because of a configuration error, use the following method which does not require a network connection.

To restore the Network Print Server to factory defaults, complete the following steps:

1.Power down the Network Print Server.

2.While holding in the Print Configuration Sheet Test button, power up the Network Print Server. Hold the button until the status indicator turns solid green.

3.Power cycle the Network Print Server. The defaults are now restored.

TCP/IP 128