Oki 6200E manual LAN Manager/LAN Server 168

OkiLAN 6200e Plus User’s Guide

3.Associate a print queue with the new local printer port.

Once the installation is complete, you can verify com- munication by printing a configuration sheet.

Network Preparation

•You must have network administrator privileges to install the Network Print Server.

•You must have physical access to an OS/2 file server to host the OKI software utilities.

•Write down the serial number and the Ethernet address of your Network Print Server. You can find the information on the test printout.

•OS/2 and LAN Manager/LAN Server must be con- figured with the following protocol: DLC/802.2 pro- tocol stack

•LAN Manager users must enable the remote boot facility.

•LAN Server 2.X users must run the LAN Server installation utility and select the 802.2 protocol.

•LAN Server 3.0 users must run the LAPS utility and select the 802.2 protocol.

•OS/2 Warp Users must run the MPTS utility and select the 80w.w protocol. See your network administrator or the LAN Manager/LAN Server manuals for instructions.

•The initial installation requires the file server to be brought down and then back up again. This may be a consideration when you are planning your install.

LAN Manager/LAN Server 168