OkiLAN 6200e Plus User’s Guide

lj4 - The local queue name on the HP-UX system to which print jobs will be directed. The print jobs are destined for a printer attached to the Network Print Server.

OKIPRINTER - The host name of the remote sys- tem which is the Network Print Server. For exam- ple, to telnet to the Network Print Server and invoke the Network Print Server Configuration util- ity, you would type telnet OKIPRINTER. A host name is not required for the Network Print Server, the IP Address may be used.

yourqueuename - This is the name of the queue on the Network Print Server and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. For more information, see Remote Print Queue Names.

Prerequisites

Before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails!

1.The name OKIPRINTER and the IP address assigned to the Network Print Server are in the “/ etc/hosts” file on the HP-UX system.

2.Make sure the rlp process is not running by typing at the UNIX prompt: ps -e grep rlp If rlp is not running, you will not see any output after executing

TCP/IP

149

Page 149
Image 149
Oki 6200E manual 149