OkiLAN 6200e Plus User’s Guide

(Network_Print_Server_name:anyone): <Enter>

230 User logged in. ftp> binary<Enter> 200 Type set to I.

ftp> put chart.ps MPX1<Enter> local: chart.ps remote: MPX1 200 PORT command successful.

150 Opening BINARY mode data connection for MPX1.

226 Transfer complete.

4549 bytes sent in 0 seconds (4.4 Kbytes/s)

ftp> bye<Enter>

221Goodbye.<Enter>

$

Timeout Checking

If timeout checking is enabled on the Network Print Server, it closes any connection that stays idle for more than five minutes. For example, if you open an FTP connection to the Network Print Server and walk away from your computer for more than five minutes, the FTP connection will be closed. You can reestablish a connection to the Network Print Server with the OPEN command.

Raw Port Printing

Host computer software can use a raw TCP/IP port connection to send data to the Network Print Server. A TCP/IP port has been assigned to the output port of the Network Print Server as follows:

TCP/IP Port: 9100

TCP/IP

97

Page 97
Image 97
Oki 6200E manual Timeout Checking, Raw Port Printing, TCP/IP Port