Oki 6200E manual TCP/IP Configuration and Printing Overview

OkiLAN 6200e Plus User’s Guide

•Verify the IP address, default gateway and subnet mask are set to the proper values on the Network Print Server by printing a configuration sheet. This can be done using either the print configuration sheet button, through the OkiNet utilities, or via Tel- net

•If the settings appear to be correct, try repeating the installation steps. If problems persist, call Oki Data Customer Support at 1-800-OKI-DATA (1- 800-654-3282).

TCP/IP Configuration and Printing

TCP/IP Configuration and Printing Overview

The Network Print Server supports printing from com- puters using TCP/IP and any of the following printing protocols:

•Line Printer Redirect/Line Printer Daemon (LPR/ LPD)

•File Transfer Protocol (FTP)

•Printing directly through a TCP port (Raw Port Printing)

This chapter presents basic instructions on how to configure your computer to print using Remote LPD and FTP. Specific instructions for several popular com- puter systems have been documented in Application Considerations. If your specific system is not addressed there, follow the instructions outlined in this chapter. You should also refer to your operating sys-

TCP/IP 88