Oki 6200E manual OkiNet Connect for IP, System Requirements

OkiLAN 6200e Plus User’s Guide

OkiNet Connect for IP

OkiNet Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your com- puter to a printer attached to an OKI TCP/IP enabled print server. OkiNet Connect has advantages over other TCP/IP printing options. It allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiNet Connect are sent directly to the print server and not routed through a network server, result- ing in a reduction of network traffic.

System Requirements

To use OkiNet Connect for TCP/IP for your Windows NT 4.0/2000/XP operating system, your computer must be configured to run TCP/IP. The Network Print Server must also be configured to run TCP/IP.

Installation

To install OkiNet Connect for TCP/IP, follow the instructions below:

1.Install the OkiNet Connect for TCP/IP files.

2.When installation is complete, click on Start, Set- tings and then Printers.

3.Select the Windows printer from which you would like to print with the OkiNet Connect, then select Properties from the menu.

4.Add an OkiNet Connect port. This may be done by selecting Add Port under the Ports tab.

Windows Printing 202