CARE AND MAINTENANCE - 5000 SERIES MODELS
FUEL SHUT OFF VALVE:
A fuel shut off valve is located at the bottom rear of each fuel tank.
Always turn the valve to the "OFF" position when the mower is stored or not in use.
LUBRICATION
CHASSIS: | Number of grease zerks used: (7) |
LOCATIONS: | (1) each front wheel caster and each front wheel hub |
| (1) each mower deck shaft |
SERVICE INTERVALS: | Every 50 hours of operation |
RECOMMENDED GREASE: | Name brand wheel bearing or |
| Rotate or spin each front wheel after 3 full pumps of the grease |
| gun. Repeat until the appearance of grease is noted around |
| each caster. Lubrication of the mower deck shafts will help |
| dispel moisture within the hub casting. Bearings are of a sealed |
| design. |
Page 27