Unpacking, Installation | Krell Industries KRS-IA specs

KRS-IA PREAMPLIFIER

Thank you for purchasing the KRS-IA Preamplifier. The KRS-IA is the latest evolution in KRELLs' preamplifier technology and represents advances is circuitry sophistication and sonic quality not found in any other preamplifier at any cost. Two notable design features are its' completely mono- phonic operation and the absence of any capacitors in the signal path. Please read this instruction manual completely before using the KRS-IA. Its' installation and operation are very easy to understand and it will provide many years of trouble-free performance. Please be sure to return the en- closed warranty card.

UNPACKING

While unpacking the KRS-IA please inspect the units for shipping damage. If any damage is evident contact your dealer or the factory immediately. If the unit is in proper condition proceed with installation. In addition to the two preamplifier chassis and two power supply chassis you will find two short DC cables for connection between the supplies and preamps, and one allen driver to be used for removing the top cover and phono board. The purpose of these oper- ations will be detailed below.

INSTALLATION

The KRS-IA is designed to be set up with the two preamp chassis sitting on top of the two power supplies. Before proceeding with the final installation please read the Phono Section Set Up and C.D. Section Set Up portions of the manual as they involve removal of the preamp top covers.

This is much easier to accomplish before the entire preamp is in place. After completing set up of the Phono and C.D. sections place the four chassis where they will be perma- nently. Connect the two DC cables between the eight pin connectors on the supplies and the preamps. The AC cables can now be connected between the supplies and the AC mains.

You can now proceed with connection of the various source components in your system. The rear panel inputs follow, from left to right as viewed from the front, the assignment on the "Select" switch from phono to tuner, etc. Typically the top chassis is used for the left channel, the bottom one for the right channel.

After the inputs are the Record Outputs.

Last are two sets of Main Outputs. These operate in unison and are provided as a convenience for routing to two inde- pendant systems.

KRS-IA specifications

Krell Industries has long been synonymous with high-end audio performance, and the KRS-IA represents a pinnacle of their engineering prowess. This integrated amplifier exemplifies the brand's commitment to delivering superior sound quality, innovative technology, and user-centric design.

At the heart of the KRS-IA is its powerful amplification circuitry, engineered to provide exceptional clarity and dynamics across a broad frequency spectrum. With a robust output of 300 watts per channel, the KRS-IA is designed to drive even the most demanding speakers, ensuring a thrilling audio experience in any listening environment. The amplifier's low impedance capability minimizes distortion, allowing for a more accurate reproduction of music.

One of the standout features of the KRS-IA is its advanced digital signal processing. This technology allows for precise control over sound characteristics, providing users with the ability to fine-tune their audio experience. The integrated DAC (Digital-to-Analog Converter) supports high-resolution audio formats, delivering pristine sound quality from a variety of digital sources. The KRS-IA's compatibility with high-fidelity streaming services further enhances its versatility, making it a modern solution for audiophiles who appreciate both digital and analog sources.

In terms of design, the KRS-IA boasts a sleek and elegant aesthetic. The chassis is constructed from premium materials to minimize resonance and interference, ensuring the purest audio output. The user interface is intuitive, featuring a large, clear display and a range of connectivity options, including multiple analog inputs, USB ports, and digital inputs for seamless integration with various devices.

Attention to detail is evident in every aspect of the KRS-IA. The amplifier is equipped with a sophisticated power supply that enhances dynamic response and stability, while the high-quality internal components contribute to a refined auditory experience. Krell's engineering expertise shines through in its thermal management, which ensures optimal performance without overheating.

In conclusion, Krell Industries' KRS-IA is a powerhouse of audio engineering. Its combination of robust amplification, cutting-edge digital technology, and stylish design places it firmly within the realm of high-end audio solutions. For those seeking an integrated amplifier that delivers uncompromised sound quality and versatility, the KRS-IA stands out as a top choice in the market.