CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the parking brake is engaged while the control levers are in the drive position.
CAUTION | Engage parking brake |
| before starting engine. |
TO SET PARKING BRAKE:
The hand operated parking brake is located on the left hand side of the mower.
•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).
Note: Always set parking brake before dismounting.
Release parking brake before moving mower.
MOWER DECK CUT HEIGHT LIFT LEVER:
•Located to the right and front of the operator.
•Controls the cutting height.
•Eighteen positions of adjustment
•Push foot lever forward, depress trigger and move lever forward to lower deck.
•Push foot lever forward, depress trigger and pull lever back to raise deck.
Note: Always use high position for transport.
20