CONTROLS
BLADE DRIVE:
•Located on the control panel, on operator’s right. •To engage the mower blade, pull up on the switch. •To disengage mower blade, push down.
CIRCUIT BREAKER:
•Located on the control panel to the operator’s right. •Protection of the electrical system is by (1) 15 amp
circuit breaker.
•If circuit breaker trips, push button to reset.
•If this condition repeats, consult dealer for inspection and repair.
THROTTLE CONTROL LEVER:
•Located on control panel to operator’s right. •Throttle control for engine speed.
•Throttle control should be set to MAXIMUM or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed while mowing.
21