Dixon ZEETER manual Fire Hazards

Page 13

WARNING

Failure to observe the following safety instructions could result in serious injury or death.

FIRE HAZARDS (continued):

To prevent fire or explosion, keep sparks and open flames away from battery.

Keep electrical connections clean and tight. Inspect them often. Loose connections and corrosion increase fire risk.

Before disconnecting the negative ground cable, make sure all switches are off. This decreases the chance of sparking and fire.

Use care when backing to avoid pushing the grass bags into the frame or “hot” exhaust muffler of the engine. Fire could result.

To prevent fire and explosion caused by static electricity:

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove fuel powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment on a trailer with a portable container, rather than from a fuel dispenser nozzle.

If a fuel dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Zeeter Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Zeeter Residential Mower Dixon ZTR Residential Warranty PolicyBody SpecificationsControl Levers ControlsTo SET Parking Brake Parking BrakeBefore Operating Mower Towing Trailers and Other Attachments Transmission Drive SystemThrottle Control Lever Blade DriveMower Deck CUT Height Lift Lever Operation Instructions Engine has been operated for a period of time Starting InstructionsEngine should not turn over or attempt to start Testing of Safety Interlock SystemsMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions Maintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication Belts TiresBelt Tension Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsChanging the Engine OIL OIL Fill Mower Deck Leveling Procedure Illustration a IllustrationB Maintenance Rear Chain AdjustmentDeck Removal Drive System Adjustments Blades Standard Service Parts ListEngine AIR and OIL Filters Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Page Page Page Date OIL Changed Date Engine Tuned OWNER’S InformationDixon INDUSTRIES, INC

ZEETER specifications

Dixon ZEETER is a cutting-edge industrial equipment solution designed primarily for fluid transfer applications in various sectors, including agriculture, construction, and manufacturing. This high-performance pump stands out due to its versatility, efficiency, and advanced engineering.

At the heart of the Dixon ZEETER’s functionality is its robust construction. Made from durable materials, it is designed to withstand harsh environments and heavy usage. The pump’s body often features corrosion-resistant materials, making it suitable for handling a wide range of fluids, including chemicals, water, and slurries. This resilience not only ensures longevity but also guarantees reliability in critical applications.

One of the main features of the Dixon ZEETER is its innovative pumping technology. The pump typically employs a positive displacement mechanism, which allows for precise control over the flow rate. This is particularly beneficial in agricultural applications where accurate fluid delivery is crucial for irrigation systems. The ability to maintain a consistent flow also minimizes waste and enhances overall operational efficiency.

The design of the Dixon ZEETER includes user-friendly components that simplify maintenance and reduce downtime. Quick-connect fittings and easily accessible parts facilitate prompt service, enabling operators to spend more time focusing on productivity rather than repairs. This ease of maintenance is a significant advantage in industries where time is money.

Furthermore, the Dixon ZEETER incorporates advanced sealing technologies that prevent leaks and ensure optimal performance. The seals are designed to withstand varying pressures and temperatures, which is essential for maintaining the integrity of the fluid being transferred. This focus on leak prevention not only protects the environment but also meets regulatory standards, ensuring compliance in various industries.

In terms of operational versatility, the Dixon ZEETER is equipped with variable speed options, allowing it to adapt to a wide range of operational requirements. This feature makes it an ideal choice for both small-scale and large-scale applications. Whether used for routine fluid transfer or in demanding conditions, the pump’s adjustable capabilities provide the flexibility needed to optimize performance.

In conclusion, the Dixon ZEETER represents a significant advancement in fluid transfer technology. Its rugged construction, innovative pumping mechanism, ease of maintenance, and operational versatility make it a preferred choice in numerous sectors. As industries continue to evolve and demand more efficient solutions, the Dixon ZEETER stands ready to meet the challenge, ensuring effective fluid management across various applications.
Top Page Image Contents