Dixon ZEETER manual Rear Chain Adjustment, Maintenance

Page 42

CARE AND MAINTENANCE

REAR CHAIN ADJUSTMENT:

CAUTION

Stop engine, remove key and set parking brake before attempting to adjust the rear chain.

Proper tension for the rear chains is accomplished through the use of an adjuster located at mid-point of each rear chain.

To adjust, tighten the nut on top of the rubber spring until the chain has approximately 1/4” movement up and down when measured at mid-point. Refer to Illustration B, page 41.

NOTE:	Adjust rear drive chains after first 10 hours of
	use and every 40 hours thereafter.
NOTE:	DO NOT OVERTIGHTEN CHAIN!

Maintenance:

Periodically remove any build-up of grass, mud or other debris from both the spring loaded roller and the upper guide rod. The use of a high quality chain lubri- cant is recommended.

Image 42

Contents Zeeter Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR Residential Warranty Policy Zeeter Residential MowerSpecifications BodyControls Control LeversParking Brake To SET Parking BrakeBefore Operating Mower Transmission Drive System Towing Trailers and Other AttachmentsBlade Drive Throttle Control LeverMower Deck CUT Height Lift Lever Operation Instructions Starting Instructions Engine has been operated for a period of timeTesting of Safety Interlock Systems Engine should not turn over or attempt to startMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructionsSide Discharge of the Clippings Grass Height & Cutting Suggestions Care and Maintenance Maintenance ScheduleCutter Blade Maintenance Battery EngineLubrication Tires BeltsBelt Tension PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsChanging the Engine OIL OIL Fill Mower Deck Leveling Procedure Illustration a IllustrationB Rear Chain Adjustment MaintenanceDeck Removal Drive System Adjustments Standard Service Parts List BladesEngine AIR and OIL Filters Troubleshooting Engine WON’T Turn OverMower Loses Power or Transmission Overheats Page Page Page OWNER’S Information Date OIL Changed Date Engine TunedDixon INDUSTRIES, INC

ZEETER specifications

Dixon ZEETER is a cutting-edge industrial equipment solution designed primarily for fluid transfer applications in various sectors, including agriculture, construction, and manufacturing. This high-performance pump stands out due to its versatility, efficiency, and advanced engineering.

At the heart of the Dixon ZEETER’s functionality is its robust construction. Made from durable materials, it is designed to withstand harsh environments and heavy usage. The pump’s body often features corrosion-resistant materials, making it suitable for handling a wide range of fluids, including chemicals, water, and slurries. This resilience not only ensures longevity but also guarantees reliability in critical applications.

One of the main features of the Dixon ZEETER is its innovative pumping technology. The pump typically employs a positive displacement mechanism, which allows for precise control over the flow rate. This is particularly beneficial in agricultural applications where accurate fluid delivery is crucial for irrigation systems. The ability to maintain a consistent flow also minimizes waste and enhances overall operational efficiency.

The design of the Dixon ZEETER includes user-friendly components that simplify maintenance and reduce downtime. Quick-connect fittings and easily accessible parts facilitate prompt service, enabling operators to spend more time focusing on productivity rather than repairs. This ease of maintenance is a significant advantage in industries where time is money.

Furthermore, the Dixon ZEETER incorporates advanced sealing technologies that prevent leaks and ensure optimal performance. The seals are designed to withstand varying pressures and temperatures, which is essential for maintaining the integrity of the fluid being transferred. This focus on leak prevention not only protects the environment but also meets regulatory standards, ensuring compliance in various industries.

In terms of operational versatility, the Dixon ZEETER is equipped with variable speed options, allowing it to adapt to a wide range of operational requirements. This feature makes it an ideal choice for both small-scale and large-scale applications. Whether used for routine fluid transfer or in demanding conditions, the pump’s adjustable capabilities provide the flexibility needed to optimize performance.

In conclusion, the Dixon ZEETER represents a significant advancement in fluid transfer technology. Its rugged construction, innovative pumping mechanism, ease of maintenance, and operational versatility make it a preferred choice in numerous sectors. As industries continue to evolve and demand more efficient solutions, the Dixon ZEETER stands ready to meet the challenge, ensuring effective fluid management across various applications.