Krell Industries REFERENCE 64 manual Assembly Instructions, PAGE6

Page 6

ASSEMBLY

ASSEMBLY INSTRUCTIONS

1.The processor is designed to sit directly on top of its companion Power Supply. There is a mechanical interlock built into the front feet of the processor and the chassis cover of the Power Supply. The units are secured together in the rear by the power coupler.

2.Place the Power Supply on a clear work surface. Notice the locking shoes at the front top of the Power Supply cover and the lock pins at the rear top of the Power Supply cover.

3.Locate the Processor main unit. Carefully turn the unit over to expose the chassis feet. Observe the design of the feet. The feet have been carefully designed to slide into the shoes on the front top of the Power Supply cover. The rear feet on the processor unit fit directly over the pins protruding on the rear top of the Power

Supply cover. The rear feet are self-centering over the rear

protruding pins on the Power Supply cover.

4.Face the front of the Power Supply. Holding the front of the

Processor with both hands and the faceplate of the Processor facing you, tilt the rear of the processor unit up and slide the unit into the shoes on the top of the Power Supply cover. Once the feet are in the cover shoes, gently set the rear of the processor down

on the Power Supply. The self-centering feet should center themselves directly over the pins on the rear section of the Power Supply cover.

PAGE6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Reference Introduction PAGE3 Table of Contents Unpacking PAGE5Assembly Assembly InstructionsPAGE6 PAGE7 Placement PlacementAC Power AC Power ConsiderationsConnections Input and Output ConnectionsPAGE10 Connections PAGE12 PAGE13 Tape Monitor Inputs and Outputs Digital Source to D/A Converter Interlink CONSID- Erations AES/EBUTimesync PAGE16PAGE17 HOW to Connect AT&T Cables Input Select Switching Input Frequency IndicatorsOperation Phase Switch Source and Monitor SelectionEmphasis LED Operating Instructions PAGE22 Questions and Answers PAGE23Questions and Answers PAGE25 Specifications PAGE26Warranty and Service Warranty and Service InformationKrell Industries, Inc

REFERENCE 64 specifications

Krell Industries REFERENCE 64 is a high-performance audio amplifier that exemplifies precision engineering and cutting-edge technology in the world of high-fidelity sound reproduction. As a flagship model from Krell Industries, it is designed to deliver unmatched audio quality, making it an essential component for audiophiles who demand the very best from their sound systems.

One of the standout features of the REFERENCE 64 is its exceptional power output. With a robust 64 watts per channel, this amplifier is capable of driving even the most demanding speakers with ease, ensuring clear and dynamic sound reproduction across all audio frequencies. This power is complemented by Krell's proprietary Current Mode technology, which allows the amplifier to respond better to speaker impedance variations, resulting in improved sound fidelity and lower distortion levels.

The REFERENCE 64 is meticulously engineered for superior thermal management, employing advanced cooling mechanisms to prevent overheating and maintain optimal performance over extended periods. This includes large heat sinks and intelligent thermal controls that ensure the amplifier operates within safe temperature ranges, prolonging its lifespan while maintaining sound quality.

Krell Industries has also integrated its renowned Cast (Krell Accelerated Speaker Technology) feature into the REFERENCE 64. This innovation enables precise communication between components in a multi-amplifier setup, minimizing phase distortion and maintaining absolute timing accuracy for an immersive listening experience. With Cast, the amplifier synchronizes with other Krell units, resulting in a coherent soundstage that envelops listeners.

The amplifier's chassis is constructed from high-quality materials, providing excellent rigidity and stability while minimizing resonance. This design philosophy contributes to enhanced sound clarity and detail retrieval, allowing users to experience their favorite tracks as intended by the artists. Additionally, the REFERENCE 64 boasts a sleek, modern aesthetic that fits seamlessly into any high-end audio setup.

In terms of connectivity, the amplifier is equipped with a variety of input options, including balanced XLR and unbalanced RCA inputs, enabling compatibility with a wide range of source components. Krell's attention to detail extends to the internal wiring and component selection, which is carefully chosen to optimize audio signal integrity.

Overall, Krell Industries' REFERENCE 64 is a remarkable audio amplifier that embodies the pinnacle of audio engineering. With its powerful performance, advanced technologies, and thoughtful design, it stands as a testament to Krell's commitment to delivering an unparalleled audio experience for discerning listeners. Whether used in a dedicated music room or as part of a luxurious home theater system, the REFERENCE 64 is sure to elevate any audio setup to new heights.
Top Page Image Contents