Dixon 13090-0700, ZTR 6022 manual Starting Instructions Cold Engine, Unlock Transmission

Page 19

OPERATION INSTRUCTIONS

STARTING INSTRUCTIONS: Cold Engine

1.Push choke control lever fully forward.

2.Push throttle control lever to 1/2 setting.

3.Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position.

4.Once engine starts to warm up, slowly move choke control lever to the fully closed position.

5.Move throttle control lever to the wide open or maximum setting for actual operation of the mower deck.

6.Engine must be operated at wide open or maximum setting to insure adequate lubrication, cooling and cut quality of the mower deck.

Note: 6000 Series mowers will require a slightly longer warm-up period using partial choke settings.

UNLOCK TRANSMISSION:

The freewheel levers are located on each side of the mower below the seat mount (flip up the foot deck to access them). Lift the levers slightly, push them to the rear and down to release the transmissions for free wheeling. To engage the transmissions lift the levers slightly, pull them forward and then down.

NOTE: The tractor should never be pulled at more than 2 miles per hour or for any appreciable distance.

REARTIRE

TRANSMISSION

RELEASE VALVE

FREEWHEELLEVER

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 6000 Important Read Carefully Index Safety Safety Alert Symbol General Operation Do not Slope OperationChildren Service Models6000&7000 Dixon Limited WARRANTYPOLICY- CommercialmodelsSeries Forward Mount SpecificationsSeat Adjustment Instructions Control Locations ControlsParking Brake To GO Backward Circuit Breaker Blade DriveMower Deck CUT Height Lift Lever Towing Operation InstructionsTesting of Safety Interlock Systems Unlock Transmission Starting Instructions Cold EngineEngine has been operated Starting InstructionsGrass Height Suggestions Discharge chuteMaintenance Schedule Care and MaintenanceEngine Belts Mower BladesChecking & Replenishing OIL in Hydrostatic Transmission LubricationHydrostatic Transmission Parking Brake AdjustmentScalper Roller Bolts Hydrostat Drive Belt Tension Adjustment Steering Control Adjustments Steering Control Adjustments Lower and Reattach the Deck see diagram-page Down Hanger Engagedposition Changing the Fluid in Deck Drive Gearbox Checking Deck Drive Gearbox Fluid LevelLeveling the Deck Deck Spindle Belt Diagram Model ZTR Standard Service Parts ListKohler AIR and OIL Filter Part Numbers Engine Wont Turn Over TroubleshootingEngine Idles Poorly Page Date OIL Changed Date Engine Tuned Owner InformationSeries 6022
Top Page Image Contents