Dixon 1950-2300 Series manual Specifications, Model ZTR 1950

	SPECIFICATIONS
	Model ZTR 1950 and 2300
CHASSIS:	11 GA - rectangular tube
SEAT:	Designed for operator comfort by use of high-density closed cell foam
	padded back and arm rests, upholstered with CorduraTM water-
	repellent fabric. Seat is adjustable fore and aft. Mounted on operator
	suspension system.
MOWER DECK:	Two decks are available. The 60” is made of stamped steel. The 50”
	is made of 11 GA fabricated welded construction with external
	reinforcement ribs. Three blades combine for a 50” or 60” cut width.
	Cut height approximately 1.5” to 5” via 8 position lift handle.
BLADE DRIVE:	Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDP 10A
	pump and a White CE 14 hydraulic motor.
ENGINE:
Model 1950:	19HP Kawasaki , overhead valves, replaceable oil filter, full pressure
	lube system, dual element air cleaner, integral fuel pump.
Model 2300:	23 HP Kohler Command, 4-cycle, V-Configuration, Overhed Valve, Air-
	Cooled, Gasoline, Vertical Shaft, Aluminum Head and Crankcase with
	Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter, Pulse Type
	Fuel Pump, Fixed Jet Carburetor w/Smart-Choke, Electronic Ignition,
	In-line Fuel Filter, Dual Element Air Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on parking brake
	and blade drive clutch.
TIRES:	Front	11 X 4 X 5 ribbed tread (16-21 lbs)
	Rear	20 X 10 X 8 Turf Master (8-14 lbs)
CAPACITIES:	Fuel - 11 gallon (approximately)
	Hydrostat Oil tank - 4 quart with in-line 40 micron filter
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	60” (50” Deck), 72” (60” Deck)
	Height	46.5”
	Length	75”
	Weight	737 lbs, (50” Deck], 770 lbs (60” Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14