Dixon 18626-106 manual Grass Height & Cutting Suggestions

Page 31

OPERATION INSTRUCTIONS

GRASS HEIGHT & CUTTING SUGGESTIONS:

Do not attempt to cut grass when it is wet.

If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

Keep the underside of the mower deck clean.

Maintain sharp blades throughout the cutting season.

As a rule of thumb, never cut off more than 1/3 of the total grass blade length. Correct mowing height can reduce weeds and disease by 50% to 80%.

The following grass cut heights are based on adequate moisture conditions and normal thatch build-up in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types

Best Cut Heights

Bermudagrass

1 - 2”

Bluegrass

2 - 3”

Buffalograss

11/2 -3”

Ryegrass

2 - 3”

Tall Fescue

3-31/2

Zoysiagrass

1 - 3”

31

Image 31
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Kodiak Diesel SpecificationsSeat Adjustment Instructions Control Levers ControlsTo SET Parking Brake Parking BrakeMower Deck CUT Height Lift Lever Circuit Breaker Blade DriveThrottle Control Lever Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Neutral Spring Adjustment Leveling the Deck Mower Deck Removal Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Engine AIR and OIL Filters Standard Service Parts ListBlades BeltsPage Date OIL Changed OWNER’S InformationKodiak