Dixon 1857-0599 manual Changing the Engine OIL

Page 30

CARE AND MAINTENANCE

CAUTION HOT oil may cause burns. Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL:

1.The "snap lock" oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.

3.Push the valve body in and twist to clear the detent notch.

4.Pulling the valve body outward will start the flow of oil.

NOTE: Refertoenginemanufacturer'srecommendationsforfrequencyofoilchanges.

BRIGGS & STRATTON	KOHLER

PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.

-PROTECT YOUR ENVIRONMENT-

Page 30

Image 30

Contents Series Important Read Carefully Index Safety Safety Symbols Safety Alert SymbolGeneral Operation Slope Operation Do notChildren Service Dixon Limited Warranty Policy -- ZTR Model Specifications Models ZTR 4515B and 4516KSeat Adjustment Instructions Controls To SET Parking Brake ControlsParking Brake Transmission Drive SystemTo GO Backward Blade Drive Operation Instructions Before Operating MowerTesting of Safety Interlock Systems Engine should not turn over or attempt to startStarting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Side Discharge of the Clippings Grass Height SuggestionsCare and Maintenance Maintenance ScheduleMower Blade Maintenance Belt Tension Forward Travel Speed Adjustment Neutral Adjustment Mower Deck Leveling Procedure 50 Deck Removal Changing the Engine OIL OIL Fill LubricationSerial Numbers Standard Service Parts List Briggs & Stratton Filter Part NumbersTroubleshooting Mower CUT QualityDrive System Electrical System Owner Information Series 4515B&4516K Part No