Dixon 1856-0599 manual Mowing with a Grass Catcher Attachment

Page 21

OPERATION INSTRUCTIONS

MOWING WITH A GRASS CATCHER ATTACHMENT:

In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below.

1.Some applications may require installation of an optional weight box on the front of the mower to offset cut grass weight.

2.Set engine speed control to the wide open or full setting.

3.Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog both the underside of the deck and the attachment chutes. Empty bags often to prevent plugging.

4.If the grass is tall, place the mower deck cut height selector in the top or second notch. "Initially" overlap cutting swaths instead of a full swath with each pass.

5.Keep The Underside Of The Mower Deck Clean. Frequent removal of dried grass and dirt will greatly assist in bagging of the clippings.

6.Maintain Sharp Blades Throughout The Cutting Season. Some grass catching attachments require "high-lift" blades.

7.Operate the mower at a slower ground speed than when mowing without a grass catching attachment.

CAUTION

•Watch for low hanging branches or other obstacles which might hit the catcher top while turning or backing the mower.

•Use care when backing to avoid pushing the grass bags into the frame or "hot" exhaust muffler of the engine.

•Disengage blade and stop engine prior to clearing grass from either the discharge chute or grass catcher components.

•Keep all attachment bolts tight.

•Do Not operate the mower with the grass catching attachment partially removed.

• Important:

• Do not leave clippings in the bags while the mower is stored.

 

• Damp grass clippings are a fire hazard if left in the bags.

Page 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Series Important Read Carefully Pages IndexSafety Safety Symbols General Operation Do not Slope OperationChildren Service Dixonprotectionplustwoyearlimitedwarrantypolicy Specifications Seat Adjustment Instructions Controls Controls Parking BrakeTransmission Drive System To GO Backward To GO ForwardTurning BrakingBlade Drive Towing Operation InstructionsTesting of Safety Interlock Systems Starting Instructions CUT High MOW Often Mowing with a Mulching AttachmentMowing with a Grass Catcher Attachment Grass Height Suggestions Side Discharge of the ClippingsCare and Maintenance Maintenance ScheduleOFF-SEASON Battery Storage Cutter Blade Maintenance Engine to Mower Deck Belt Belt TensionMower Deck Leveling Procedure Deck Removal OIL Filters Changing the Engine OILOIL Fill Service IntervalsLubrication LocationsRear Chain Adjustment Drive System AdjustmentsPARTS/SERVICE WarrantyWheels and Tires Serial NumbersBriggs & Stratton Filter Part Numbers Standard Service Parts ListTroubleshooting Mower CUT QualitySituation Causes Remedy Situation Causes Remedy Drive SystemElectrical System Page Date OIL Changed Date Engine Tuned Owner Information4000Series 4423

1856-0599 specifications

Dixon 1856-0599 is a remarkable example of technological evolution in the realm of precision engineering and design. This model, originally manufactured in the mid-19th century, reflects the advanced capabilities of its time, combining innovative technology with exceptional craftsmanship to create a product that has endured through decades.

One of the main features of Dixon 1856-0599 is its robust construction. Designed to withstand the rigors of daily use, the model employs high-quality materials that were carefully selected to enhance durability. The use of cast iron and steel components not only provides strength but also ensures longevity, making it a reliable choice for professionals and hobbyists alike.

The technologies integrated into the Dixon 1856-0599 are noteworthy, particularly its precision engineering. The model incorporates advanced machining processes that were groundbreaking at the time of its production. Features such as fine-tuning mechanisms and accurate calibration ensure that users can achieve precise results, which is crucial for tasks requiring attention to detail.

The characteristics of the Dixon 1856-0599 further cement its place in the annals of engineering history. One defining trait is its user-friendly design, which allows for ease of operation. The ergonomic handling and intuitive controls make it accessible to individuals with varying levels of expertise, from seasoned professionals to newcomers learning the craft.

Moreover, the Dixon 1856-0599 boasts adaptability. Its design allows for an array of attachments, enabling users to modify the tool for specific tasks. This versatility has rendered it a valuable asset across multiple fields, including mechanical engineering, woodworking, and even artistic endeavors.

In conclusion, the Dixon 1856-0599 stands as a testament to the ingenuity of its creators and the enduring nature of well-designed technology. With its resilient build, advanced machining techniques, user-centered features, and adaptability, it remains a significant artifact reflecting the innovation of its time. Its legacy endures, inspiring modern designs while serving as a reminder of the importance of durability and precision in engineering. Through the years, Dixon 1856-0599 has maintained its status as a reliable tool, trusted by many and appreciated by enthusiasts who value its rich history and timeless functionality.
Top Page Image Contents