Dixon 1856-0599 manual Side Discharge of the Clippings, Grass Height Suggestions

Page 22

OPERATION INSTRUCTIONS

SIDE DISCHARGE OF THE CLIPPINGS:

In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below.

Additional information can be found in the troubleshooting guide.

CAUTION

Be sure that deflector is properly installed on the discharge chute.

1.Set engine speed control to the wide open or full setting.

2.Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog the underside of the deck and discharge area.

3.If the grass is tall, place the mower deck cut height lever in the top or second notch. Initially overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

4.Keep The Underside Of The Mower Deck Clean. Frequent removal of dried grass and dirt will allow the clippings to discharge correctly.

5.Maintain Sharp Blades Throughout The Cutting Season.

GRASS HEIGHT SUGGESTIONS:

Correct mowing height can reduce weeds and disease by 50 to 80%

The following grass cut heights are based on adequate moisture conditions and normal thatch buildup in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types:

Best Cut Heights

Zoysia

2" - 2 1/2"

Blue Grass

1 1/2" - 3"

Fescue Blends

1 1/2" - 3"

St. Augustine (Mid South)

1 1/2" - 2"

St. Augustine (Deep South)

3" - 4"

Tifton Bermuda

1 1/2"

Centipede

1 1/2" - 2"

Common Bermuda

1 1/2" - 2"

Bahia/Argentina/Pensacola

2"

 

 

Page 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Series Important Read Carefully Index PagesSafety Safety Symbols General Operation Slope Operation Do notChildren Service Dixonprotectionplustwoyearlimitedwarrantypolicy Specifications Seat Adjustment Instructions Controls Parking Brake ControlsTransmission Drive System Turning To GO ForwardTo GO Backward BrakingBlade Drive Operation Instructions TowingTesting of Safety Interlock Systems Starting Instructions Mowing with a Mulching Attachment CUT High MOW OftenMowing with a Grass Catcher Attachment Side Discharge of the Clippings Grass Height SuggestionsMaintenance Schedule Care and MaintenanceOFF-SEASON Battery Storage Cutter Blade Maintenance Belt Tension Engine to Mower Deck BeltMower Deck Leveling Procedure Deck Removal Changing the Engine OIL OIL FiltersLubrication Service IntervalsOIL Fill LocationsDrive System Adjustments Rear Chain AdjustmentWheels and Tires WarrantyPARTS/SERVICE Serial NumbersStandard Service Parts List Briggs & Stratton Filter Part NumbersMower CUT Quality TroubleshootingSituation Causes Remedy Drive System Situation Causes RemedyElectrical System Page Owner Information Date OIL Changed Date Engine Tuned4000Series 4423

1856-0599 specifications

Dixon 1856-0599 is a remarkable example of technological evolution in the realm of precision engineering and design. This model, originally manufactured in the mid-19th century, reflects the advanced capabilities of its time, combining innovative technology with exceptional craftsmanship to create a product that has endured through decades.

One of the main features of Dixon 1856-0599 is its robust construction. Designed to withstand the rigors of daily use, the model employs high-quality materials that were carefully selected to enhance durability. The use of cast iron and steel components not only provides strength but also ensures longevity, making it a reliable choice for professionals and hobbyists alike.

The technologies integrated into the Dixon 1856-0599 are noteworthy, particularly its precision engineering. The model incorporates advanced machining processes that were groundbreaking at the time of its production. Features such as fine-tuning mechanisms and accurate calibration ensure that users can achieve precise results, which is crucial for tasks requiring attention to detail.

The characteristics of the Dixon 1856-0599 further cement its place in the annals of engineering history. One defining trait is its user-friendly design, which allows for ease of operation. The ergonomic handling and intuitive controls make it accessible to individuals with varying levels of expertise, from seasoned professionals to newcomers learning the craft.

Moreover, the Dixon 1856-0599 boasts adaptability. Its design allows for an array of attachments, enabling users to modify the tool for specific tasks. This versatility has rendered it a valuable asset across multiple fields, including mechanical engineering, woodworking, and even artistic endeavors.

In conclusion, the Dixon 1856-0599 stands as a testament to the ingenuity of its creators and the enduring nature of well-designed technology. With its resilient build, advanced machining techniques, user-centered features, and adaptability, it remains a significant artifact reflecting the innovation of its time. Its legacy endures, inspiring modern designs while serving as a reminder of the importance of durability and precision in engineering. Through the years, Dixon 1856-0599 has maintained its status as a reliable tool, trusted by many and appreciated by enthusiasts who value its rich history and timeless functionality.
Top Page Image Contents