Maintenance

ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING.

9.Parking Brake:

Parking brake is on right hand side of floor area and is engaged by pushing full forward with foot. To disengage, pull lever back toward operator by hand. In emergency situations, brake may be used in conjunction with the natural braking of the transaxle by applying pressure with foot. Always set parking brake before dismounting. Be sure that parking brake is disengaged before moving.

BEFORE PERFORMING ANY MAINTENANCE, SHUT OFF ENGINE, ALLOW TO COOL AND DISCONNECT SPARK PLUG.

ENGINE

For complete engine operating and maintenance informa- tion, refer to engine operating and maintenance instructions furnished by the engine manufacturer and supplied with each mower.

BATTERY

Procedure for initial activation of battery:

1.Fill with electrolyte solution to lower ring of battery.

2.Let stand for 30 minutes.

3.Charge at 4 amps for 3 hours or 1 amp for 12 hours.

4.After initial filling, fluid level may be maintained with distilled water.

Procedure for off-season storage:

1.Charge battery.

2.Disconnect cables from battery terminals. Identify cables so that they may be easily reconnected to the correct

terminal. (See also wiring diagram shown on Body Assembly illustration.)

3.Clean top of battery and terminals.

4.Do not remove battery from mower.

5.To reactivate, reconnect cables to correct terminals and charge battery if needed.

BELT ADJUSTMENT

The best tension for a V -belt drive is the lowest tension at which the belts will not slip under normal load condition. Check the tension on a new belt frequently during first hours of operation and every 10-15 hours or monthly thereafter. Too much tension shortens belt and bearing life. Too little tension causes slippage and loss of power. Be sure that belts and pulleys are kept free of foreign material. If belt slippage occurs, tighten it just enough to prevent slippage.

TRANSAXLE DRIVE BELT

To adjust tension, loosen four (4) bolts which hold engine to mount and belt keeper in place. Adjust tension bolt (located at rear of chassis) until desired tension is achieved. Do not over tighten. Tighten four (4) bolts holding engine.

MOWER DRIVE BELT

Belt tension for mower drive belt is adjusted by loosening nut on mower deck turnbuckle assembly and turning turnbuckle to achieve desired tension. Retighten nut. Tension should be checked with belt in engaged position.

REPLACE BELTS WHEN ADJUSTMENT CAN NO LONGER BE MADE SATISFACTORILY OR IF BELTS BE- COME WORN.

424, 422 specifications

Dixon 422 and 424 are two notable models in the Dixon lineup, known for their exceptional performance and reliability in various industrial applications. These machines have garnered attention for their robust construction and advanced technological features, making them suitable for both light and heavy-duty tasks.

One of the main characteristics of the Dixon 422 and 424 is their powerful engine options. Both models come equipped with high-performance engines that provide ample horsepower, ensuring smooth operation even under demanding conditions. The engines are designed to deliver optimal fuel efficiency, reducing operational costs while maintaining high productivity levels.

In terms of design, the Dixon 422 and 424 boast a sturdy frame built from high-quality materials, enabling them to withstand rugged environments. Their durable construction not only enhances their longevity but also ensures that they can handle heavy loads with ease. Additionally, the machines feature a user-friendly layout, allowing for easy access to essential components for maintenance and repair activities.

The technologies integrated into the Dixon 422 and 424 play a significant role in their functionality. Both models are equipped with advanced hydraulic systems, which provide precise control over various operations, enabling users to perform tasks with greater accuracy. The incorporation of responsive hydraulic controls allows for smooth transitions during operation, improving overall efficiency.

Another notable feature of these models is their versatility. The Dixon 422 and 424 can be customized with various attachments and accessories, making them suitable for a wide range of applications, from construction to landscaping. This adaptability ensures that users can tailor the machines to meet their specific needs, enhancing their utility across different projects.

Safety is also a priority in the design of the Dixon 422 and 424. Both machines include essential safety features such as emergency stop buttons and protective cab designs, ensuring operator safety during use. The visibility from the operator’s station is optimized, allowing for better situational awareness while working in busy environments.

In summary, the Dixon 422 and 424 models stand out due to their combination of power, durability, advanced technology, versatility, and safety features. These characteristics make them valuable assets for professionals in various industries, offering reliable performance that meets the demands of modern work environments. As the industrial landscape continues to evolve, these machines are well-positioned to adapt and deliver consistent results.