Dixon ELS 60 manual Hydrostat Fluid Maintenance Procedure

Page 41

CARE AND MAINTENANCE

HYDROSTAT FLUID MAINTENANCE

PROCEDURE:

Check the fluid level in hydrostatic transmisison fluid reservoir after every 25 hours of usage. Clean the fluid reservoir cap and the area around it prior to removal. Check the fluid level. Fluid should be approximately 1/4” below top of fluid tank baffle. Replenish as needed with Dixon Blue™ 15W-50 Synthetic Hydrostatic Fluid. DO NOT OVERFILL. When checking the fluid level, be very careful to keep the reservoir clean.

Change the fluid in the reservoir and hydrostatic transmission fluid filter after the first 100 hours of use, then every 500 hours after that. Remove the filter and be sure all fluid has drained from the reservoir. Replace with a new OEM filter (P/N 18045) and Dixon Blue™ 15W-50 Synthetic Hydrostatic Fluid.

CAUTION: Dixon Blue™ is only compatible with standard 20W-50 motor oil or similar synthetic motor oils.

DO NOT USE OR ADD STANDARD (RED) HYDRAULIC/ TRANSMISSION OIL IN YOUR DIXON HYDROSTATIC DRIVE. DAMAGE TO THE DRIVE COMPONENTS MAY OCCUR. USE ONLY APPROVED DIXON BLUE™

15W-50 SYNTHETIC HYDROSTATIC FLUID OR 20W-50

TYPE ENGINE OIL.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Kodiak ELS-60 SpecificationsSeat Adjustment Instructions Control Levers ControlsMower Deck CUT Height Lift Lever Parking BrakeTo SET Parking Brake Choke and Throttle Control Levers Blade DriveCircuit Breaker Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Neutral Spring Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Blades Standard Service Parts ListBelts Engine AIR and OIL FiltersDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC

ELS 60 specifications

The Dixon ELS 60 is an innovative and versatile engine management solution designed for a broad range of applications. Tailored for performance-driven environments, the ELS 60 combines advanced technologies with user-friendly features, making it an attractive option for both professional and amateur motorsport enthusiasts.

At the heart of the ELS 60 is its powerful processing unit, which allows for rapid data acquisition and real-time engine tuning. This advanced processing capability ensures that users can quickly adapt to changing conditions and optimize engine performance to meet specific demands. The ELS 60 supports a variety of fuel types, including gasoline and ethanol blends, providing flexibility for different setups and tuning requirements.

One of the standout features of the ELS 60 is its comprehensive sensor support. The system can interface with a wide range of sensors, including temperature, pressure, and flow sensors. This extensive compatibility allows users to monitor critical parameters and make informed adjustments, maximizing performance and efficiency.

The Dixon ELS 60 is equipped with an intuitive software interface that simplifies the tuning process. The software provides real-time data visualization and logging capabilities, enabling users to analyze engine performance and make adjustments on-the-fly. With easy-to-navigate menus and customizable dashboards, even those with limited experience can harness the full potential of the system.

Safety is a paramount consideration in engine management, and the ELS 60 addresses this with advanced fail-safe features. These include over-temperature protection and fuel cut-off thresholds that prevent engine damage under extreme conditions. This focus on safety ensures that users can push their engines to the limits without compromising reliability.

Another important characteristic of the ELS 60 is its compact and lightweight design. This enhances its suitability for various applications, from motorsport to industrial uses, where space and weight constraints are critical. Additionally, the robust construction of the ELS 60 ensures durability, even in the most demanding environments.

To sum up, the Dixon ELS 60 represents a cutting-edge engine management solution, combining advanced processing capabilities, extensive sensor support, user-friendly software, and superior safety features. Its compact design and adaptability make it an ideal choice for anyone looking to enhance their engine's performance and reliability. As the automotive landscape continues to evolve, tools like the ELS 60 are becoming indispensable in the quest for improved efficiency and power.
Top Page Image Contents