Dixon ELS 60 manual Mower Deck Leveling Procedure

Page 45

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE (continued):

D.Turn both outer blades to align with the deck in front-to-rear manner. Turn left rear adjuster nut up or down until rear of mower deck is positioned level to 1/8” higher in the rear than the side-to-side measurement. At this time, the mower deck will be suspended on (3) points (both front adjusters and the left rear adjuster). Move the right rear adjuster and take out the slack which will be present by turning adjuster locknutup.

E.Confirm measurements once again. Blade tips should be level in a side-to-side manner. In the rear, blade tips should be level to 1/8" higher than side-to-side measurement. In the front, blade tips should be level to 1/8" lower than side- to-side measurement.

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions being mowed.

Image 45

Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR PRO Series COMMERCIAL/RESIDENTIAL Warranty Policy Kodiak ELS-60 SpecificationsSeat Adjustment Instructions Control Levers ControlsParking Brake To SET Parking BrakeMower Deck CUT Height Lift Lever Blade Drive Circuit BreakerChoke and Throttle Control Levers Before Operating Mower Operation InstructionsStarting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Neutral Adjustment Neutral Spring Adjustment Mower Deck Leveling Procedure Mower Deck Leveling Procedure Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsMower Deck Removal Engine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Blades Standard Service Parts ListBelts Engine AIR and OIL FiltersDate OIL Changed OWNER’S InformationDixon INDUSTRIES, INC

ELS 60 specifications

The Dixon ELS 60 is an innovative and versatile engine management solution designed for a broad range of applications. Tailored for performance-driven environments, the ELS 60 combines advanced technologies with user-friendly features, making it an attractive option for both professional and amateur motorsport enthusiasts.

At the heart of the ELS 60 is its powerful processing unit, which allows for rapid data acquisition and real-time engine tuning. This advanced processing capability ensures that users can quickly adapt to changing conditions and optimize engine performance to meet specific demands. The ELS 60 supports a variety of fuel types, including gasoline and ethanol blends, providing flexibility for different setups and tuning requirements.

One of the standout features of the ELS 60 is its comprehensive sensor support. The system can interface with a wide range of sensors, including temperature, pressure, and flow sensors. This extensive compatibility allows users to monitor critical parameters and make informed adjustments, maximizing performance and efficiency.

The Dixon ELS 60 is equipped with an intuitive software interface that simplifies the tuning process. The software provides real-time data visualization and logging capabilities, enabling users to analyze engine performance and make adjustments on-the-fly. With easy-to-navigate menus and customizable dashboards, even those with limited experience can harness the full potential of the system.

Safety is a paramount consideration in engine management, and the ELS 60 addresses this with advanced fail-safe features. These include over-temperature protection and fuel cut-off thresholds that prevent engine damage under extreme conditions. This focus on safety ensures that users can push their engines to the limits without compromising reliability.

Another important characteristic of the ELS 60 is its compact and lightweight design. This enhances its suitability for various applications, from motorsport to industrial uses, where space and weight constraints are critical. Additionally, the robust construction of the ELS 60 ensures durability, even in the most demanding environments.

To sum up, the Dixon ELS 60 represents a cutting-edge engine management solution, combining advanced processing capabilities, extensive sensor support, user-friendly software, and superior safety features. Its compact design and adaptability make it an ideal choice for anyone looking to enhance their engine's performance and reliability. As the automotive landscape continues to evolve, tools like the ELS 60 are becoming indispensable in the quest for improved efficiency and power.