Dixon 3500 Series manual Deck Removal

Page 35

CARE AND MAINTENANCE

DECK REMOVAL:

1.Move deck lift lever to lowest cut position.

2.Rotate seat assembly forward.

3.Pull idler to relieve belt tension. Remove belt.

4.Remove cotter pin, washer and clevis pin from rear deck brackets (2 places).

Note: Raising the front of the deck slightly to sit on blocks will take the pressure off clevis pins.

5.Push deck forward to separate front deck brackets from hanger rod. Deck will fall to the floor.

6.Slide deck from underneath chassis. (Reverse proce- dure to reinstall deck assembly.

NOTE: When deck is reinstalled on frame, check that belt is correctly routed in the grooves of all pulleys and that belt idler is applying tension to the back side of the belt.

Image 35

Contents Series Important Read Carefully Index Blade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol Never carry passengers General OperationHarm Do not Slope OperationChildren Service Service Excluded Dixon Limited Warranty Policy Residential HydroModel ZTR 3530 SpecificationsSeat Adjustment Instructions Control Levers ControlsMower Deck CUT Height Lift Lever Parking BrakeThrottle & Choke Control Lever Blade DriveCircuit Breaker Before Operating Mower Operation InstructionsTo Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsSeat Switch Test Testing of Safety Interlock SystemsParking Brake Switch Test Blade Drive Switch TestStarting Instructions Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetMowing Side Discharge Set engine speed control to the wide open or full settingMowing Mulching Attachment Mowing Mulching Attachment Mowing Grass Catcher Attachment Mowing Grass Catcher Attachment Maintenance Schedule Care and MaintenanceTires BatteryOFF Season Battery Storage EngineCutter Blade Maintenance Parking Brake Adjustment Neutral Adjustment Stop engine and remove rear of machine from jack or blocks Mower Deck Leveling Procedure Deck Removal Changing the Engine OIL Locations Service IntervalsLubrication BeltsElectrical Systems Cleaning the MowerWarranty PARTS/SERVICEBriggs & Stratton AIR and OIL Filter Part Numbers Standard Service Parts ListEngine WON’T Turn Over TroubleshootingEngine Runs but Mower WON’T Move Forward Page Owner Information ZTRMowers

3500 Series specifications

The Dixon 3500 Series is an advanced line of industrial-grade pumps designed for superior performance in various applications. Renowned for their reliability and efficiency, these pumps are particularly well-suited for use in construction, mining, and agricultural settings, where the demand for robust and durable equipment is paramount.

One of the standout features of the Dixon 3500 Series is its high flow rate capability, enabling it to handle large volumes of liquids quickly and effectively. This characteristic makes it an ideal choice for dewatering applications, where rapid drainage is essential. With a variety of configurations and sizes available, users can select the model that best fits their operational needs.

The 3500 Series incorporates cutting-edge technologies that enhance its performance and longevity. A key technology utilized is the advanced hydraulic design that minimizes turbulence, thereby optimizing the efficiency of fluid transfer. This results in lower energy consumption, making it a cost-effective option for organizations looking to reduce operational expenses.

Durability is another critical characteristic of the Dixon 3500 Series. Constructed from high-quality materials, these pumps are built to withstand harsh environments, featuring corrosion-resistant coatings and rugged casings. Additionally, they are designed with easy maintenance in mind, allowing for quick inspections and repairs to minimize downtime.

Furthermore, the Dixon 3500 Series is equipped with user-friendly controls and monitoring systems. This includes intuitive interface options that facilitate real-time monitoring of pump performance, ensuring that users can quickly identify potential issues and address them proactively. Enhanced safety features are also included, providing peace of mind during operation.

The versatility of the Dixon 3500 Series cannot be overstated. It supports a wide range of applications, from pumping water and slurry to handling chemicals and other liquids. Thanks to its modular design, users can easily adapt the pump for different tasks, making it a valuable asset in various industrial settings.

In summary, the Dixon 3500 Series exemplifies a perfect blend of power, efficiency, and durability. With its high flow rate capabilities, advanced hydraulic design, and robust construction, it stands out as a top choice for professionals seeking reliable pumping solutions in demanding environments. Whether for dewatering, chemical transfer, or other industrial applications, the 3500 Series delivers exceptional performance tailored to meet the needs of modern industries.