Dixon 4000 Series manual Changing the Engine OIL Models ZTR 4421 & ZTR, OIL Fill

Page 25

CARE AND MAINTENANCE - 4000 SERIES MODELS

HOT oil may cause burns.

Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL: MODELS ZTR 4421 & ZTR 4422

1.The "snap lock" oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under -the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.

3.Push the valve body in and twist to clear the detent notch.

4.Pulling the valve body outward will start the flow of oil.

NOTE: Refer to engine manufacturers recommendations for frequency of oil changes.

OIL FILL:

1.Push the valve body in and twist into the detent notch.

2.Clean any spilled oil from engine and chassis.

3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

NOTE: Oil changes on the Model 4422 require replacement of the oil filter. This filter can be obtained from any authorized Kohler engine dealer. (P/N 52 050 02) The use of any other oil filter may cause damage to the engine.

PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. PROTECT YOUR ENVIRONMENT

Page 22

Image 25

Contents Page Important Read Carefully Index Blade Contact TIP-OVER RUN-OVER SafetyGeneral Operation Do not Slope OperationChildren Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Subject to Change Without Notice DimensionsChassis Body Mower Deck EngineModels ZTR 4421 & ZTR Seat Adjustment InstructionsControls To SET Parking Brake Parking BrakeTransmission Drive System To GO Backward Togo ForwardTurning BrakingMower Deck CUT Height Lift Lever Blade DriveCircuit Breaker Starting Instructions Before Operating MowerMowing with a Mulching Attachment Maintain Sharp Blades Throughout The Cutting Season Mowing with a Grass Catcher AttachmentOperation Instructions Maintenance Schedule Care and Maintenance 4000 Series ModelsBattery OFF-SEASON Battery StorageCutter Blade Maintenance Engine to Mower Deck Belt Belt TensionMower Deck Serpentine Belt Deck Removal Fuel Shut OFF Valve Service IntervalsLubrication Chassis LocationsOIL Fill Changing the Engine OIL Models ZTR 4421 & ZTRRear Chain Adjustment Drive System AdjustmentsRear Tires X 9 0 X Air Pressure Briggs & Stratton AIR Filter Part Numbers Standard Service Parts ListKohler AIR Filter Part Numbers Mower CUT Quality TroubleshootingSituation Causes RemedyDrive System Situation Causes Remedy Electrical System Situation Causes Remedy Consult your dealer for repair Owner Information Page 316 251 2OOO FAX 316 251