Dixon D26KH54 manual Tools Required for Assembly, Toremovetractorfromcarton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

1/2" wrench

Tire pressure gauge

(2)

7/16" wrenches

Utility knife

 

 

Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TOREMOVETRACTORFROMCARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton .

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Remove mower and packing materials.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

TO CHECK BATTERY (See Fig. 1)

•Lift hood to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

•For battery and battery cable installation see "RE- PLACING BATTERY" in the "Service and Adjustments" section in this manual.

LABEL

Fig. 1

ADJUST SEAT (See Fig. 2)

•Sit in seat.

•Lift up adjustment lever (A) and slide seat until a com- fortable position is reached which allows you to press clutch/brake pedal all the way down.

•Release lever to lock seat in position.

A

Fig. 2

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in "transmission disengaged" position (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents D26KH54 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Keys Slope SheetToremovetractorfromcarton AssemblyTools Required for Assembly Before Removing Tractor from SkidChecklist Operation Know Your Tractor Reverse Operation System ROS onHOW to USE Your Tractor System Characteristics To Adjust Mower Cutting Height See FigsTo Adjust Gauge Wheels See Fig To USE Cruise Control J See FigTo Operate on Hills To Stop Mower BladesReverse Operation System ROS To Transport See FigCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine ADD GasolineMowing Tips Purge TransmissionGeneral Recommendations MaintenanceMaintenance ScheduleBlade Care BatteryTractor Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower and Drive Belt See Figs SET Parking Brake Lever and Lower AT- Tachment Lift See FigANTI-SWAY BAR S Turn Steering Wheel Left and Position Mower See FigSlide Mower Under Tractor See Fig Attach Rear Lift Links C See Fig Install Belt on Engine Clutch Pulley M SeeAttach Mower Side Suspension Arms a to Chassis See Fig Attach Front Link E See FigTo Level Mower To Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Check Brake To Start Engine with a Weak Battery See FigReplacing Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionFires when turn To run when operBattery will not Engine continuesSuggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXService Notes Service Notes Limited Warranty

D26KH54 specifications

The Dixon D26KH54 is a remarkable lawn and garden equipment model that stands out due to its powerful features, cutting-edge technologies, and robust characteristics. Designed with efficiency and ease of use in mind, this machine is an ideal choice for both residential and commercial landscaping needs.

One of the standout features of the D26KH54 is its engine. Powered by a reliable and efficient Kohler engine, this model ensures consistent performance and impressive power output. With its ability to handle various conditions, the engine allows users to tackle even the toughest mowing jobs with confidence. The engine's efficiency translates to lower fuel consumption, making it an environmentally friendly option for users.

Another noteworthy characteristic of the Dixon D26KH54 is its cutting deck. Featuring a wide 54-inch cutting width, the deck allows for rapid mowing, significantly reducing the time needed to cover large areas. The deck is also equipped with multiple height adjustment settings, enabling users to customize the cut according to their specific lawn care requirements. This flexibility ensures a clean and professional-looking finish every time.

The D26KH54 incorporates advanced technologies that enhance user comfort and efficiency. Ergonomically designed controls provide an intuitive interface, making it easy for users to operate the mower even during extended periods. The seat is well-padded and adjustable, which adds to the comfort factor while minimizing fatigue during prolonged use.

Durability is another key aspect of the Dixon D26KH54. Constructed from high-quality materials, this mower is built to withstand the rigors of outdoor use. The heavy-duty chassis and reinforced frame provide stability and longevity, ensuring that the machine can handle challenging terrains without compromising performance.

Additionally, the D26KH54 offers exceptional maneuverability, thanks to its responsive steering and compact design. It is capable of navigating around obstacles with ease, making it an ideal choice for residential lawns with intricate landscaping.

Lastly, the maintenance of the Dixon D26KH54 is straightforward, with easily accessible components designed for quick servicing. Users can perform routine checks and necessary repairs without hassle, further enhancing the overall experience of owning this model.

Overall, the Dixon D26KH54 is a powerful, efficient, and user-friendly mower that embodies the perfect blend of technology and ruggedness, making lawn care an enjoyable task for every user.
Top Page Image Contents