CARE AND MAINTENANCE
! | CAUTION HOT oil may cause burns. Allow engine to |
cool before draining oil. |
CHANGING THE ENGINE OIL:
1.The “Dapco” oil drain valve is located on the left side of the engine crankcase.
2.Place a suitable container under the drain valve hose.
3.To drain, turn hex head valve stem counter- clockwise with a 10mm wrench or socket. (See Fig. 9) Open to full open (approximately 7 turns).
Hex Head Valve Stem
4.After engine is drained, tighten hex stem.
5.Change oil filter.
6.Fill with oil (see steps on next page).
NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.
36