ASSEMBLY
3CONTAINER MOUNTING
1.Install container, centering between support tubes.
NOTE: One container should always overlap the other container at supports.
2.Close cover and lock latch handles over center support tubes.
Cover Latch
Handle
Container
Bags
Support
Tubes
WARNING
DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or dam- aged. Use only a recommended replace- ment container.
4ADAPTER BRACKET
1.Turn mower engine off.
2.Remove grass deflector on mower by remov- ing hair pin cotter, spring and deflector pin. The deflector and hardware should be stored for when the grass catcher is not used.
3.Attach adapter bracket to the deck with the bolts and nuts removed in Step 2. See illustra- tion.
Grass Bagger
Adapter Bracket
Reuse Nuts
Deflector
Bracket
Reuse Bolts
Adapter Bracket
Attached
CAUTION
Before removing deflector shield, turn mower engine off.
9