CARE AND MAINTENANCE
NEUTRAL ADJUSTMENT
DRIVE MACHINE UNTIL HYDROSTATS HAVE WARMED UP. WITH ENGINE RUNNING AND THE PARKING BRAKE OFF, SWING OUT THE CONTROL LEVERS. IF MACHINE STARTS TO CREEP, FOLLOW THE INSTRUCTIONS BELOW.
1.Stop the engine, engage parking brake and raise rear of frame with jack or blocks so that rear tires do not contact the ground.
2.Swing out the control levers, start the engine and release the parking brake.
3.Raise the seat to access hydro control linkage. If right wheel creeps, adjust right side linkage and
a.Loosen jam nuts on ends of the coupler P/N 7736.
b.If right wheel is creeping forward, turn coupler
c.Tighten jam nuts against coupler.
34