Dixon 14295-1005 manual Specifications, Body

	SPECIFICATIONS
CHASSIS:	11 GA welded channel frame
BODY:	All body parts made of rotational molded polyethylene.
	Front body contains access panel for battery service.
	Seat tilts forward to allow transmission service.
MOWERDECK:	11 GA stamped steel construction. Single 30” cut blade.
	Cut height approximately 1-1/2”- 4” via 7-position lift
	handle.
BLADEDRIVE:	Mechanical; hand lever engagement
TRANSMISSION:	Each rear wheel is independently driven by chain and
	sprockets through a friction mechanical drive.
ENGINE:	11HP Briggs & Stratton I/C, 4-cycle, single cylinder, air-
	cooled, gasoline, vertical shaft, aluminum head and block.
STARTINGSYSTEM:	Electric by key switch operation with safety interlocks on
	parking brake and blade drive.
TIRES:	Front	9 x 3.50-4 Smooth Tread
	Rear	16 x 6.50-8 Turf Saver
RECOMMENDED	Front	16-21 PSI
TIREPRESSURE:	Rear	8-14 PSI
CAPACITIES:	Fuel	3 quart
	Engine	1.25 quarts oil
DIMENSIONS:	Width	32” outside rear wheel measurement
	Width	40” overall width of deck with deflector
	Height	31” to top edge of seat
	Length	65.5” hitch tab to front
	Weight	390 lbs.

Additional information may be provided elsewhere in this manual.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

17