CONTROLS
BLADE DRIVE:
•Located to the left of the operator.
•To engage the mower blade, turn lever on floor slowly to the “ON” position.
•To disengage mower blade, turn lever to the “OFF” position.
THROTTLE CONTROL LEVER:
•Located on control panel to operator’s right.
•Throttle control for engine speed. •Choke for engine starting. •Throttle control should be set to
MAXIMUM or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed while mowing.
MOWER DECK CUT HEIGHT LIFT LEVER:
•Located to the left of the operator.
•Controls the cutting height.
•Seven positions of adjustment.
•Move lever in and forward to lower.
•Move lever in and back to raise.
Note: Always use high for transport.
22