Dixon 16463-106 manual Neutral Adjustment

Page 39

CARE AND MAINTENANCE

NEUTRAL ADJUSTMENT

DRIVE MACHINE UNTIL HYDROSTATIC TRANSMISSIONS HAVE WARMED UP. WITH ENGINE RUNNING AND THE PARKING BRAKE OFF, SWING THE CONTROL LEVERS OUTWARD. IF MACHINE STARTS TO CREEP, FOLLOW THE INSTRUCTIONS BELOW.

1.Stop the engine, engage parking brake and raise rear of frame with jack or blocks so that rear tires do not contact the ground.

2.Swing control levers outward, start the engine and release the parking brake.

3.Raise the seat to access hydro control linkage. If right wheel creeps, adjust right side linkage and vice-versa. Use procedure below.

a.Loosen jam nut on end of the coupler P/N 7736.

b.If right wheel is creeping forward, turn coupler counter-clockwise until neutral is achieved (clockwise for left side). If right wheel is creeping backward, turn coupler clockwise until neutral is achieved (counter-clockwise for left side).

c.Tighten jam nut against coupler.

4.Stop engine and remove rear of machine from jack or blocks.

(See Illustration A, page 40)

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR Residential Warranty Policy SpeedZTR SpecificationsControl Levers ControlsParking Brake To SET Parking BrakeTransmission Drive System Blade Drive Throttle Control LeverMower Deck CUT Height Lift Lever Before Operating Mower Operation InstructionsStarting Instructions To Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsParking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructions Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height & Cutting Suggestions Maintenance Schedule Care and MaintenanceCutter Blade Maintenance Engine BatteryLubrication TiresChanging the Engine OIL OIL Fill Belt Tension BeltsNeutral Adjustment Illustration a Illustration B Mower Deck Leveling Procedure Deck Removal Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingMower Loses Power or Transmission Overheats Standard Service Parts List BladesEngine AIR and OIL Filters Date OIL Changed OWNER’S InformationSpeedZTR

16463-106 specifications

The Dixon 16463-106 is a robust and versatile product that stands out in its category due to its innovative design and range of high-performance features. As a prominent wellhead assembly component, it is widely utilized in various industrial applications, particularly in the oil and gas sector.

One of the key features of the Dixon 16463-106 is its durable construction. It is typically made from high-quality materials such as stainless steel or carbon steel, ensuring longevity and resistance to harsh environmental conditions. This resilience not only enhances its performance but also allows it to maintain structural integrity under high pressure and temperature fluctuations.

Another significant aspect of the Dixon 16463-106 is its precision engineering. The component is designed to meet rigorous industry standards, ensuring reliability and safety during operation. This is critical in applications where the margin for error is minimal, as any failure could have catastrophic consequences.

The Dixon 16463-106 employs advanced sealing technologies that are designed to prevent leaks and ensure optimal fluid control. These sealing mechanisms are crucial for maintaining system integrity and minimizing maintenance costs over time. Furthermore, the component features an easy-to-install design, simplifying the installation process and reducing labor costs for operators.

In terms of compatibility, the Dixon 16463-106 is designed to work seamlessly with a range of other equipment and fittings, making it a versatile choice for various setups. This adaptability is essential for industries that require flexible solutions to meet changing operational demands.

Moreover, the Dixon 16463-106 is engineered for ease of maintenance. It is designed with accessibility in mind, allowing technicians to perform inspections and servicing without extensive downtime. This feature is particularly valuable for industries where continuous operation is critical.

Finally, environmental considerations have not been overlooked in the design of the Dixon 16463-106. The manufacturers prioritize sustainability and aim to provide products that contribute to more efficient resource management and reduced environmental impact.

In summary, the Dixon 16463-106 is characterized by its durability, precision engineering, advanced sealing technologies, compatibility with various systems, ease of maintenance, and commitment to environmental sustainability. These features make it a leading choice for industries requiring reliable and efficient solutions.
Top Page Image Contents