Dixon 16463-106 manual Side Discharge of the Clippings

Page 30

OPERATION INSTRUCTIONS

SIDE DISCHARGE OF THE CLIPPINGS:

In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the Troubleshooting guide.

CAUTION To avoid personal injury, be sure that the deflector is properly installed on the discharge chute.

1.Set engine speed control to the wide open or full setting.

2.Do not attempt to cut grass when it is wet. Wet grass will clog the underside of the deck and discharge area.

3.If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

4.Keep the underside of the mower deck clean. Frequent removal of dried grass and dirt will allow the clippings to discharge correctly. Never, under any circumstances, should you place hands or feet under the mower deck or in the chute while blades or impeller are still turning.

5.Maintain sharp blade(s) throughout the cutting season.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Dixon ZTR Residential Warranty Policy Specifications SpeedZTRControls Control LeversParking Brake To SET Parking BrakeTransmission Drive System Blade Drive Throttle Control LeverMower Deck CUT Height Lift Lever Operation Instructions Before Operating MowerStarting Instructions Towing Trailers and Other Attachments To Free Wheel Machine Unlock TransmissionTesting of Safety Interlock Systems Parking Brake Switch TestEngine should Stop Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Failure to observe the following instructionsSide Discharge of the Clippings Grass Height & Cutting Suggestions Care and Maintenance Maintenance ScheduleCutter Blade Maintenance Battery EngineTires LubricationChanging the Engine OIL OIL Fill Belts Belt TensionNeutral Adjustment Illustration a Illustration B Mower Deck Leveling Procedure Deck Removal PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsTroubleshooting Engine WON’T Turn OverMower Loses Power or Transmission Overheats Standard Service Parts List BladesEngine AIR and OIL Filters OWNER’S Information Date OIL ChangedSpeedZTR

16463-106 specifications

The Dixon 16463-106 is a robust and versatile product that stands out in its category due to its innovative design and range of high-performance features. As a prominent wellhead assembly component, it is widely utilized in various industrial applications, particularly in the oil and gas sector.

One of the key features of the Dixon 16463-106 is its durable construction. It is typically made from high-quality materials such as stainless steel or carbon steel, ensuring longevity and resistance to harsh environmental conditions. This resilience not only enhances its performance but also allows it to maintain structural integrity under high pressure and temperature fluctuations.

Another significant aspect of the Dixon 16463-106 is its precision engineering. The component is designed to meet rigorous industry standards, ensuring reliability and safety during operation. This is critical in applications where the margin for error is minimal, as any failure could have catastrophic consequences.

The Dixon 16463-106 employs advanced sealing technologies that are designed to prevent leaks and ensure optimal fluid control. These sealing mechanisms are crucial for maintaining system integrity and minimizing maintenance costs over time. Furthermore, the component features an easy-to-install design, simplifying the installation process and reducing labor costs for operators.

In terms of compatibility, the Dixon 16463-106 is designed to work seamlessly with a range of other equipment and fittings, making it a versatile choice for various setups. This adaptability is essential for industries that require flexible solutions to meet changing operational demands.

Moreover, the Dixon 16463-106 is engineered for ease of maintenance. It is designed with accessibility in mind, allowing technicians to perform inspections and servicing without extensive downtime. This feature is particularly valuable for industries where continuous operation is critical.

Finally, environmental considerations have not been overlooked in the design of the Dixon 16463-106. The manufacturers prioritize sustainability and aim to provide products that contribute to more efficient resource management and reduced environmental impact.

In summary, the Dixon 16463-106 is characterized by its durability, precision engineering, advanced sealing technologies, compatibility with various systems, ease of maintenance, and commitment to environmental sustainability. These features make it a leading choice for industries requiring reliable and efficient solutions.
Top Page Image Contents