EDIT | ADDITIONAL INFORMATION |
|
|
•Press PLAY 2.
–The remaining tracks will now be played.
–After the last track play will stop; 
lights up.
NOTE!
–As soon as you press PLAY 2 the other changer functions will temporarily be switched off to prevent the recording being interfered with; EDIT ACTIVE lights up if you press one of the other buttons during recording.
–You can quit the EDIT mode by pressing STOP 9. or OPEN/CLOSE ; EDIT CANCELLED then lights up.
–EDIT NOT POSSIBLE lights up if you try to record a CD containing more than 40 tracks.
–Should the CD or the program be longer than the total recording time of the tape, play will stop after the last track that fits onto side B of the tape.
–Should the first track of the first CD or the program be longer than one side of the tape (= the entered recording time divided by two), then EDIT NOT POSSIBLE will light up. You will now have to enter another recording time.
Synchronized Recording
•Make sure that the changer is connected via the REMOTE CONTROL sockets to the REMOTE CONTROL IN (RC 5 IN) sockets of the Marantz cassette deck.
•Set the changer to EDIT mode.
•Select the © (auto reverse) mode (if available) on the cassette deck.
•Set the TIMER switch (if available) on the deck to ‘PLAY/SYNC REC’ position.
–The cassette deck will go into REC PAUSE mode (=synchrosized recording mode).
• Press PLAY on the CD Changer.
–Recording starts and after 4 seconds play starts at the beginning of the CD or the programme.
–After each track an extra pause of 4 seconds (AUTO SPACE will be inserted.
–AUTOSPACE lights up.
–If you record a programme from different CDs the cassette deck will go into PAUSE mode everytime the CD Changer selects a new CD in the CD compartment. As soon as playback of the new CD starts, the deck will continue the recording.
–After the last tract that fits on side A of the tape, the CD changer will go into PAUSE mode.
–As soon as the CD changer receives a command from the cassette deck, playback starts with the first rack for side B. You may also press PAUSE to restart play.
–Synchrosized recording will stop after the last track of the CD or programme.
NOTE!
–As soon as you start recording, the other changer functions will temporarily be switched off to prevent the recording being intefered with; EDIT ACTIVE lights up if you press one of the other buttons during play/recording.
–You can stop playback/recording by pressing STOP.
Maintenance
The CDs
• Never write on the printed side of a CD.
• Do not attach any stickers to the CD.
•Keep the shiny surface of the disc clean. Use a soft
and always wipe the disc in a straight line from centre to edge.
•Never use cleaning agents for conventional records.
•Detergents or abrasive cleaning agents should not be used either.
The changer
•A chamois leather slightly moistened with water is sufficient for cleaning the changer.
•Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives.
Environmental Information
All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easily separable into three
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
English
17