INSTALLATION
English
COAXIAL
DIGITAL OUTPUT
RL
ANALOG
OUT
IN OUT
REMOTE
CONTROL
1 2 3
Connections
1Digital Out
This output supplies digital signal and can therefore only be connected to an input which is suitable for this signal. Use here a lead with one cinch plug on either end.
Never connect this socket to a
2Analog Out
For the connecting cable to the amplifier.
•Insert a red plug into the ‘R’ socket and the other plug into the ‘L’ socket.
•Insert the two other plugs into the corresponding sockets of the CD or AUX input of your amplifier. You can also use the TUNER or TAPE IN connection, but never the PHONO input!
3Remote Control
For connecting up the equipment when you are incorporating the changer in a HiFi system with its own remote control system.
Connecting Headphones (for CC4000 & CC4000OSE only)
•Connect headphones with a 6.3 mm jack plug to the PHONES socket.
•The sound level is adjusted with the LEVEL control.
PHONES/
LEVEL
Note:
–The volume control on the remote control must not be at the minimum level.
7