Marantz DV7001 manual TV Aspect, Progressive, Video output format when progressive is on

Page 45

DVD Setup Menu

CHANGING PAL TO NTSC

1.ENSURE THAT YOUR TV SYSTEM SUPPORTS NTSC STANDARD.

2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV.WAIT IS SECONDS FOR AUTO RECOVER

OKCANCEL

Video output format when progressive is "ON".

Disc

TV

Output Format

Format

system

 

 

YCbCr

Video/S-Video

 

 

 

 

 

 

NTSC

PAL

PAL Progressive

NTSC

 

 

 

 

 

NTSC

NTSC Progressive

NTSC

 

 

 

 

 

MULTI

NTSC Progressive

NTSC

 

 

 

 

PAL

PAL

PAL Progressive

PAL

 

 

 

 

 

NTSC

NTSC Progressive

PAL

 

 

 

 

 

MULTI

PAL Progressive

PAL

 

 

 

 

If progressive is "OFF", Video Output Format follow the TV SYSTEM with Interlace.

To change the TV system manually:

~Press OPEN CLOSE 0 to open the disc tray without HDMI connected.

ŸPress 3 (RIGHT) on the remote control.

!Press AUDIO on the remote control to change the TV system setting.

PAL Æ NTSC NTSC Æ PAL

TV ASPECT

Default setting: 16:9 WIDE

Set the aspect ratio of the DVD system according to the TV type you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

4:3 PAN SCAN – Select this if you have

a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV.

4:3 LETTER BOX – Select this if you have a conventional TV. In this

case, a wide picture with black bands on the upper and lower portions of the TV will be displayed.

16:9 WIDE – Select this if you have a wide-screen TV.

Select one of the options and press ENTER to confirm.

Note

Some discs will not allow you to change the aspect ratio.

PROGRESSIVE

Default setting: OFF

Progressive scanning displays twice the number of frames per second as interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scanning offers higher picture resolution and quality.

Before you start...

Ensure that you have connected this DVD system to a progressive scan TV using the YCbCr connection (see page 11 “Home theater video connections”).

ON – Turns on progressive scan mode.

The instruction menu appears on the TV.

ACTIVATING PROGRESSIVE SCAN:

1.ENSURE YOUR TV HAS PROGRESSIVE SCAN.

2.CONNECT USING YPBPR (GBR) VIDEO CABLE.

3.IF THERE IS A DISTORTED PICTURE, WAIT

15 SECONDS FOR AUTO RECOVERY.

OKCANCEL

~Press 2 to highlight “OK” in the menu and press

ENTER to confirm.

The picture on your TV will remain distorted in

this state until you turn on the progressive scan mode on your TV.

ŸTurn on your TV's progressive scan mode (refer to the user manual for your TV.) The following menu appears on the TV.

CONFIRM AGAIN TO USE PROGRESSIVE

SCAN. IF PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

OKCANCEL

6

English

45

Image 45
Contents Model DV7001 User Guide Copy protection English Important Safety InstructionsCE marking for Europe only Table Of Contents Before You Start FeaturesUsing the remote control Putting the batteries in the remote controlKeep in mind the following when using the remote control What’s in the boxDiscs compatible with this player General information DVD-Video regionsMP3 compatibility information WMA compatibility informationEasy setup Connecting UpConnecting Hdmi cables Connecting Scart for Europe only and S-Video cablesHome theater video connections Video or composite video?Connecting analog audio cables Connecting coaxial cablesHome theater audio connections Controls & Displays Power ON/OFFFront panel Audio EXRemote control Hdmi on is set when the unit is shipped from the factory Playing discs Getting StartedBasic playback controls Resuming playback from the last stopped pointNavigating Video CD PBC menus Navigating DVD disc menusPress the Menu to turn the PBC function on or off Some discs don’t allow PBC menusPlaying Discs This option is only available during playback modeIntroduction Preview functionTo go to the previous or next page, press 4/¢ Viewing in Fast Forward/Fast Reversed Fast Forward/Fast ReversePress and hold ¢ Next during play Press and hold 4 Prev during playViewing a Paused Picture Still Frame/Slow Play/Frame Advance PlaybackViewing slow playback Step Motion playback Viewing one frame at a timeUsing the Repeat Play UsingPress Repeat during playback to select a Repeat mode Each press switches the repeat modeTo cancel Random mode, press Random Using the Random Shuffle PlayLooping a section of a disc To resume normal playback, press A-B againSwitching the Subtitle Language Switching Camera AnglesTo switch the camera angle, press Angle To set subtitle preferences, seeSwitching the audio channel Switching the Audio LanguageSwitching Super Audio CD Playback layer Switching Super Audio CD Playback areaTitle/Chapter/Track selection Play back InformationAudio/Subtitle During playback, press DispTime Display AngleTime Search RepeatTime Group/Track Selection and time searchPlaying an MP3/DivX/JPEG/ Windows Media Audio disc Press Repeat repeatedly to access various play modesInsert a disc TipPreview function Zoom pictureRotating/flipping the picture To stop simultaneous playback, press Stop Tip Playing MP3/WMA music and Jpeg pictures simultaneouslyInsert a DivX disc Playing a DivX discDivX compatibility information Press Play 3 to start playback. During playback, you canUsing the Setup Menu Using the FL menu DVD Setup MenuSelecting the FL menu Remotecode40% 100%88.2KHZX2 176.4KHZX4 WideSetting up the General Setup Press the Setup button Player ModeDefault setting DVD Audio OSD LanguageDisc Lock DivXR VOD CodeDisplay DIM ProgramSleep Screen SaverAuto Standby OFF Turns off the screen saver functionSetting up the Audio Setup Default setting 5.1 ChannelAudio OUT 2CH About source audio outputDigital OUT Lpcm OUTHdmi Audio OUT Hdmi Audio Output Speaker SET UPFront SPEAKER, Center SPEAKER, Rear SP LFE SubwooferCD Upsampling Default setting OFFAudio DRC Speaker DistanceDefault setting Ntsc USA model Setting up the Video SetupTV System PAL Europe modelOn Turns on progressive scan mode Video output format when progressive is onTV Aspect ProgressiveChroma Delay Picture SettingADV Picture GammaHdmi Video Video Out format when Hdmi is activated Setup ExamplesClosed Caption USA Model only Black LevelDynamic Picture DVI Output RangeUsing the AUDIO, Subtitle and Disc Menu language Setting up the PreferenceAudio SubtitleParental Disc MenuPBC MP3/JPEG NAVPassword Previewing VR formatDivx Subtitle Default Language Codes Additional InformationProblems with condensation Cleaning the pickup lensHandling discs Storing discsPrecautions on using the power cord Hints on installationMoving the player Don’tTroubleshooting No audio, or audio is distorted Remote control doesnt seem to workCannot output 192 kHz or 176.4 kHz digital audio Cannot output 96 kHz or 88.2 kHz digital audioSome MP3 tracks appear to be missing from a disc Disc containing the MP3 tracks won’t playNo video appears on the connected HDMI/DVI component No audio is coming from the connected Hdmi componentSpecifications Additional Information English 2007/01 PMC
Related manuals
Manual 62 pages 40.21 Kb

DV7001 specifications

The Marantz DV7001 is a versatile and feature-rich universal disc player that elevates the home entertainment experience with its advanced technologies and high-quality performance. Designed for audiophiles and movie enthusiasts alike, the DV7001 supports a wide range of disc formats, including DVD, DVD-Audio, Super Audio CD, CD, and more, making it an all-in-one solution for diverse media playback needs.

One of the key technologies that sets the DV7001 apart is its high-quality video processing capabilities. Equipped with Marantz’s proprietary video processing technology, the player ensures that video output is rendered with stunning clarity and vibrant colors. The inclusion of upscaling to 1080p enhances standard DVDs, allowing for a more compelling viewing experience on high-definition displays. This feature is particularly beneficial for users who want to enjoy their existing DVD collections with the best possible picture quality.

In addition to exceptional video performance, the Marantz DV7001 is built with a focus on audio fidelity. The player boasts a high-end audio circuit design that includes a high-quality DAC (Digital-to-Analog Converter), allowing for detailed and accurate sound reproduction. The support for high-resolution audio formats like Super Audio CD and DVD-Audio underscores its commitment to providing an immersive audio experience. Users can enjoy their music with the clarity and depth that only premium sources can offer.

The DV7001 also features advanced connectivity options, including HDMI, coaxial, and optical outputs, making it easy to integrate with a variety of home theater setups. The HDMI output enables a single-cable connection for both audio and video, streamlining the setup process. Additionally, the inclusion of a dedicated audio output allows users to connect to external DACs or stereo systems for enhanced audio experiences.

Another notable characteristic of the Marantz DV7001 is its user-friendly interface. The intuitive remote control and on-screen menus make navigating through discs and settings straightforward, allowing users to easily access their favorite content. The player's robust build quality ensures durability, while its sleek design fits seamlessly into any modern home theater environment.

In conclusion, the Marantz DV7001 is a standout universal disc player that combines high-quality video and audio performance with versatile playback options. Whether you are a film buff or a music lover, the DV7001 caters to a wide array of multimedia formats and technologies, making it a worthy addition to any entertainment system. Its commitment to quality, ease of use, and elegant design establishes it as a competitive choice in the realm of universal players.