POLE SAW ASSEMBLY
Pole/Bracket Replacement Kit - 110731R
WARNING: Verify both saw and pole are not connected to power source before assembly.
ASSEMBLY PROCEDURE
1.Push in and hold trigger lockout button. Squeeze and hold trigger. (see Figure 1, Steps 1 and 2)
2.Continue to hold trigger while sliding the handle bracket onto chain saw handle (see Figure 1, Step 3). The trigger support on the bracket will hold the trigger in the “ON” position (see Figure 2).
3.Attach pole assembly to chain saw. Align the holes in the pole bracket and handle bracket. Using four Philips head screws and lock washers provided, insert screws through lock washers and holes in pole bracket. Tighten screws securely with screwdriver into weld nuts of handle bracket (see Figure 2).
4.Plug chain saw power cord into receptacle end of pole assembly power cord (see Figure 3).
Step 3 - Slide Handle Bracket onto Chain Saw
Handle. Note: Verify Trigger Support is Under the
Trigger and the Trigger is in the “ON” Position.
Handle Bracket
Lockout Button
Trigger Support
3
Trig- 1 
2 Step 1 - Push In
Lockout Button
Step 2 - Depress Trigger
Figure 1 - Attaching Handle Bracket to Chain
Saw Handle
Handle Bracket
Pole Bracket
Pole Assembly
Philips Head | Lock | |
Screw (4) | ||
Washer (4) | ||
|
Figure 2 - Attaching Pole Saw Bracket to
Handle Bracket
Chain Saw
Power Cord
Pole Assembly Power 
Cord Receptacle
Figure 3 - Connecting Chain Saw Power Cord
to Pole Assembly Power Cord
TECHNICAL SERVICE
You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www.desatech.com or contact our Tech- nical Service Department at
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY
When contacting DESA Specialty Products™, have ready
•Your Name
•Your Address
•Your Phone Number
•Model Number of Product
•Date of Purchase (Include copy of receipt for written requests).
P.O. Box 90004
Bowling Green, KY
U.S.A. | ||
Rev. A | ||
www.desatech.com | ||
02/04 |