Desa LNT-2 100089-06 Sharpening SAW Chain, Sharpening Cutters, Items Needed to Sharpen Chain

Page 13

OWNER’S MANUAL

CLEANING AND MAINTENANCE

Continued

SHARPENING SAW CHAIN

WARNING: Unplug chain saw from power source before servic- ing. Severe injury or death could occur from electrical shock or body contact with moving chain.

Sharpening Cutters

Use file guide for 30° filing.

1.Adjust chain for proper tension (see Saw Chain Tension Adjustment, page 7).

2.Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.

3.Press 5/32" round file (attached to file guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figures 19 and 20). Note: File at midpoint of guide bar.

4.Hold file guide level. Make sure 30° mark on file guide is parallel to center of guide bar (see Figure 19). This will insure that you file cutters at 30° angle.

5.File from inside towards outside of cut- ter until sharp. Only file in this one direc- tion (see Figure 19). Note: Two or three strokes with file should sharpen cutter.

6.After each cutter is sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain.

7.Move to other side of chain and repeat process.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

Keep chain sharp. Your saw will cut faster and more safely. A dull chain will cause undue sprocket, guide bar, chain, and motor wear. If you must force chain into wood and cutting creates only sawdust with few large chips, chain is dull.

Items Needed to Sharpen Chain

30° Guide Mark

Filing

Direction

File

Guide

5/32" Round File

Purchase these items from your local dealer, hardware store, or chain saw supplies outlet.

•5/32" round file

•Depth gauge tool

•File guide

•Vise

•Medium sized flat file

Note: This illustration shows file guide placement and filing direction for sharpen- ing cutters on left side of chain.

Figure 19 - File and File Guide Placement On Chain

 

Groove

 

Depth Gauge

 

 

(left side of chain)

Left Side of

Depth Gauge

 

 

(right side

 

Chain

 

of chain)

Groove

 

 

 

Top Plate

 

Top Plate

 

(right side of chain)

(left side of chain)

 

 

 

 

 

Right Side of

 

 

Chain

Figure 20 - Chain Part Locations

Continued

107990

13

For more information, visit www.desatech.com

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Electric Chain SAW Before Operating SAW SafetyWhile Operating SAW Kickback Safety Devices On This Saw Maintenance and Storage of Chain SAWSaw Maintenance and Kickback Safety KickbackChain SAW Names and Terms Unpacking ProductOn saw backwards. If chain is AssemblyBackwards, saw will vibrate badly Will not cutFilling OIL Tank SAW Chain Tension AdjustmentExtension Cords Operating Chain SAWOiling Chain Cutting with the Chain SAWFelling a Tree Felling Procedure Felling NotchCutting Down a Tree Before Felling a TreeBucking a LOG Limbing a TreeEntire Length Of Log On Ground Log Supported On One EndLog Supported On Both Ends Trimming a Tree PruningCleaning SAW Body Cleaning and MaintenanceNormal Guide Bar Maintenance Care of Guide BARSharpening Cutters Sharpening SAW ChainItems Needed to Sharpen Chain Service Publications Technical ServiceStorage Replacing SAW ChainObserved Fault Possible Cause Remedy TroubleshootingIllustrated Parts Breakdown Installing Shoulder Screw or E-Ring Depending On ModelLNT-2 Description Parts ListEL-7 QTY Parts Dealers Authorized Service CentersIowa IA North Dakota ND Part Number Description Replacement Parts and AccessoriesEL-7, 098031J, 099039J Pole SAW, 106890-01 100089-05 Pole SAW, 104316-04 GeneralWarranty Service NON-WARRANTY Service Repair Service

LNT-2 100089-08, 076728K, 099178H, 100089-06, 100089-08, 107709-01,075762J, 098031J, 099039J, 100089-04, 100089-05, 100089-07, 107714-02, 104316-04, 106890-01, 104317, 106821, LNT-2 100089-06, EL-7 100089-07, EL-7 099039J specifications

Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are advanced technological products that represent the latest in their respective fields. Each of these models showcases features designed to enhance functionality, efficiency, and user experience.

The Desa LNT-2 076728K is engineered with cutting-edge performance capabilities. This model incorporates energy-efficient systems that minimize power consumption while maximizing output. One of its main features is a robust user interface, designed for ease of operation. Advanced sensors provide real-time feedback, ensuring optimal performance under varying conditions. Additionally, the LNT-2 model is constructed with durable materials, promising longevity and reliability in demanding environments.

Moving on to the EL-7 series, the EL-7 100089-04 and EL-7 100089-05 models share a suite of state-of-the-art technologies that enhance connectivity. Equipped with seamless wireless integration, these devices allow for effortless communication with other systems. Furthermore, both models come with enhanced data processing capabilities, enabling quick analysis and response to changing operational demands. Their intuitive design also contributes to user-friendliness, making them ideal for both seasoned professionals and newcomers.

The EL-7 107714-02 stands out for its unique adaptability. This particular model features customizable settings, allowing users to tailor its functionality to specific tasks or preferences. Enhanced safety protocols are also a key characteristic, providing users with peace of mind during operations. The combination of adaptability and safety makes this model particularly appealing for specialized applications where precision and reliability are critical.

Lastly, the LNT-2 099178H builds on the strengths of its predecessors while introducing innovations aimed at improving efficiency. This model integrates smart technology that can predict operational needs based on historical data. This predictive capability not only streamlines processes but also helps in resource allocation, reducing waste and enhancing overall productivity.

In conclusion, the Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are exemplary products that exhibit advanced technologies and features catering to diverse needs. With a focus on efficiency, connectivity, safety, and adaptability, these models set a benchmark for performance in their respective sectors.
Top Page Image Contents