Desa LNT-2 100089-08, LNT-2 076728K Trimming a Tree Pruning, Log Supported On Both Ends

Page 11

OWNER’S MANUAL

OPERATING CHAIN SAW

Continued

Log Supported On Both Ends

1.Make first cut from above log (see Fig- ure 15). Cut 1/3 through diameter of log. This cut will keep section from splintering when cut.

2.Make second cut on underside of log, directly under first cut. Use top of guide bar to make this cut. Cut up to meet first cut. This will keep log from pinch- ing guide bar and chain.

1st Cut

2nd Cut

Figure 15 - Bucking Log When Log Is Supported On Both Ends

TRIMMING A TREE (Pruning)

WARNING: Avoid kickback. Kickback can result in severe in- jury or death. See Kickback, page 3 to avoid risk of kickback.

WARNING: Do not operate chain saw while

•in a tree

•on a ladder or any other un- stable surface

•in any awkward position

You may lose control of saw caus- ing severe injury.

WARNING: Do not cut limbs higher than your shoulders.

CAUTION: Seek professional help if facing conditions beyond your ability.

Trimming a tree is the process of cutting limbs from a living tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Follow direc- tions below to trim a tree.

1.Make first cut six inches from tree trunk on underside of limb. Use top of guide bar to make this cut. Cut 1/3 through diameter of limb (see Figure 16).

2.Move two to four inches farther out on limb. Make second cut from above limb. Continue cut until you cut limb off.

3.Make third cut as close to tree trunk as possible on underside of limb stub. Use top of guide bar to make this cut. Cut 1/3 through diameter of stub.

4.Make fourth cut directly above third cut. Cut down to meet third cut. This will remove limb stub.

 

2nd Cut -

4th Cut -

Pruning Cut

(to avoid pinching)

Final Stub

 

Cut

 

6"

2" to 4"

1st Cut -

Pruning Undercut (to avoid splintering)

3rd Cut - Stub Undercut (to avoid splintering)

Figure 16 - Cutting A Limb

107990

11

For more information, visit www.desatech.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electric Chain SAW While Operating SAW SafetyBefore Operating SAW Kickback Maintenance and Storage of Chain SAWKickback Safety Devices On This Saw Saw Maintenance and Kickback SafetyChain SAW Names and Terms Unpacking ProductWill not cut AssemblyOn saw backwards. If chain is Backwards, saw will vibrate badlyFilling OIL Tank SAW Chain Tension AdjustmentCutting with the Chain SAW Operating Chain SAWExtension Cords Oiling ChainBefore Felling a Tree Felling Procedure Felling NotchFelling a Tree Cutting Down a TreeLog Supported On One End Limbing a TreeBucking a LOG Entire Length Of Log On GroundLog Supported On Both Ends Trimming a Tree PruningCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceItems Needed to Sharpen Chain Sharpening SAW ChainSharpening Cutters Replacing SAW Chain Technical ServiceService Publications StorageObserved Fault Possible Cause Remedy TroubleshootingLNT-2 Installing Shoulder Screw or E-Ring Depending On ModelIllustrated Parts Breakdown Description Parts ListEL-7 QTY Parts Dealers Authorized Service CentersIowa IA North Dakota ND Pole SAW, 104316-04 General Replacement Parts and AccessoriesPart Number Description EL-7, 098031J, 099039J Pole SAW, 106890-01 100089-05Warranty Service NON-WARRANTY Service Repair Service

LNT-2 100089-08, 076728K, 099178H, 100089-06, 100089-08, 107709-01,075762J, 098031J, 099039J, 100089-04, 100089-05, 100089-07, 107714-02, 104316-04, 106890-01, 104317, 106821, LNT-2 100089-06, EL-7 100089-07, EL-7 099039J specifications

Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are advanced technological products that represent the latest in their respective fields. Each of these models showcases features designed to enhance functionality, efficiency, and user experience.

The Desa LNT-2 076728K is engineered with cutting-edge performance capabilities. This model incorporates energy-efficient systems that minimize power consumption while maximizing output. One of its main features is a robust user interface, designed for ease of operation. Advanced sensors provide real-time feedback, ensuring optimal performance under varying conditions. Additionally, the LNT-2 model is constructed with durable materials, promising longevity and reliability in demanding environments.

Moving on to the EL-7 series, the EL-7 100089-04 and EL-7 100089-05 models share a suite of state-of-the-art technologies that enhance connectivity. Equipped with seamless wireless integration, these devices allow for effortless communication with other systems. Furthermore, both models come with enhanced data processing capabilities, enabling quick analysis and response to changing operational demands. Their intuitive design also contributes to user-friendliness, making them ideal for both seasoned professionals and newcomers.

The EL-7 107714-02 stands out for its unique adaptability. This particular model features customizable settings, allowing users to tailor its functionality to specific tasks or preferences. Enhanced safety protocols are also a key characteristic, providing users with peace of mind during operations. The combination of adaptability and safety makes this model particularly appealing for specialized applications where precision and reliability are critical.

Lastly, the LNT-2 099178H builds on the strengths of its predecessors while introducing innovations aimed at improving efficiency. This model integrates smart technology that can predict operational needs based on historical data. This predictive capability not only streamlines processes but also helps in resource allocation, reducing waste and enhancing overall productivity.

In conclusion, the Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are exemplary products that exhibit advanced technologies and features catering to diverse needs. With a focus on efficiency, connectivity, safety, and adaptability, these models set a benchmark for performance in their respective sectors.
Top Page Image Contents