Desa Tech PC3460LP Cleaning and Maintenance, Service Hints, Lighting Instructions, Battery Check

Page 8

PROPANE/LP GAS DECORATIVE PATIO FIRE

OPERATING

APPLIANCE

Continued

LIGHTING

INSTRUCTIONS

Lighting Using the Electronic Spark Ignition System

1.Open equipment shutoff valve.

2.If you smell gas, STOP! Turn the equipment shutoff valve to OFF. Check gas connections for leaks. Do not continue until gas leaks are corrected.

3.After correcting leaks, wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow the safety information in column 3, page 7. If you do not smell gas, go back to step 1.

4.Push in and hold the electronic spark ignitor button (see Figure 9). Note: You should be able to hear a rapid clicking sound from the burner bowl when the ignitor button is depressed. If you do not hear anything, see Bat- tery Check, and Troubleshooting, pages 9 and 10.

5.Slightly depress and turn control valve knob counterclockwise

to LOW. Push in and hold control valve knob.

WARNING: Keep face and hands away from burner area.

6.When burner lights, release the igni- tor button. Keep control valve but- ton pushed in. Release button after 30 seconds.

Note: If heater fails to ignite within 10 seconds, gas supply line may have air in it. If so, repeat steps 1 through 6.

Control

Valve

Ignitor

Button

Figure 9 - Ignitor Button and Control Valve

7. Set control valve knob to LOW,

MED, or HI. Slightly depress knob before turning.

8.To shut off appliance, turn control

valve knob clockwise to the OFF position.

WARNING: Close equipment shutoff valve when appliance is not in use.

Lighting Manually with a Match

1.Open equipment shutoff valve.

2.If you smell gas, STOP! Turn the equipment shutoff valve to OFF. Check gas connections for leaks. Do not continue until gas leaks are corrected.

3.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Fol- low the safety information in column 3, page 7. If you do not smell gas, go back to step 1.

4.Light a match and lay it on top of the lava rock just above the burner.

WARNING: Do not hold match. Lay burning match on top of lava rock.

5.Turn control valve knob counter-

clockwise to LOW (see Fig- ure 9). Push in and hold control valve knob.

WARNING: Keep face and hands away from burner area.

6.When burner lights, keep control valve button pushed in. Release but- ton after 30 seconds.

Note: If heater fails to ignite within 10 seconds, gas supply line may have air in it. If so, repeat steps 1 through 6.

7.Set control valve knob to LOW, MED, or HI. Slightly depress knob before turning.

8.To shut off appliance, turn control

valve knob clockwise to the OFF position.

WARNING: Close equipment shutoff valve when appliance is not in use.

BATTERY CHECK

The electronic spark ignitor operates on one alkaline AA battery (not included). The battery is located within the ignitor module behind the ignitor button. See Battery Installation, page 7, for replace- ment instructions.

CLEANING AND MAINTENANCE

Regularly check all burner ports for block- age. Burner ports are the small holes on top of the burner. Also check the ignitor port for blockage. This port is on the inside curve of the burner, pointed at the ignitor electrode. Also check the thermocouple port for block- age. This port is on the inside curve of the burner, pointed at the thermocouple. Clear blocked ports by gently inserting a small wire into the port.

Logs or lava rock may become coated with soot. If so, clean them using a bristle brush.

Check rubber supply hose periodically for signs of wear or damage. Check entire length of hose, including the portion inside the firepit pedestal. Check hose by carefully lifting the pedestal up to view the entire hose. If hose is damaged or worn, replace hose before next use. Use only original replacement parts. See Parts List on page 13 for service replacement parts.

SERVICE HINTS

When Gas Pressure Is Too Low

•burner may have delayed ignition

•propane/LP gas supply may be low

When Gas Quality Is Bad

• burner may backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact you local propane/LP gas supplier.

For more information, visit www.desatech.com

8

107497

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASSafety Information PROPANE/LP GAS Decorative Patio FireProduct Identification Air. If a leak occurs, propane/LP gas willLocal Codes Installation UnpackingHigh Altitude Derate Check GAS TypeConnecting to GAS Supply Connecting to Fixed Piping GasChecking GAS Connections Test Pressures In Excess Of 1/2 PsigFor Your Safety Read Before Lighting Battery InstallationSetup Operating ApplianceCleaning and Maintenance Service HintsBattery Check Lighting InstructionsTroubleshooting Observed Problem Possible Cause RemedyGas leak. See Warning statement at Technical Service Replacement Parts Parts CentralsAccessory Illustrated Parts Breakdown Patio FireParts List KEY For PC4670LP For PC3460LP Description QTYKeep this Warranty International

PC4670LP, PC3460LP specifications

Desa Tech PC3460LP and PC4670LP are innovative products designed for modern computing needs, featuring cutting-edge technologies to enhance performance and efficiency. Both models cater to a variety of users, from casual gamers to professionals, ensuring versatile applications across different environments.

Starting with the PC3460LP, this compact yet powerful system is built around an advanced processing unit that employs multi-core technology. This allows for seamless multitasking and smooth performance even when running resource-intensive applications. A notable characteristic of the PC3460LP is its energy-efficient design, which not only reduces power consumption but also minimizes heat generation, making it an ideal choice for users conscious of their environmental impact. Additionally, the device is equipped with integrated graphics, boasting impressive capabilities for casual gaming and multimedia playback.

On the other hand, the PC4670LP takes performance to the next level, featuring an upgraded processor that significantly increases computing speed and responsiveness. For users who demand more from their systems, the PC4670LP supports dedicated graphics cards, enabling high-quality graphics rendering, which is essential for gaming and professional design work. The system architecture incorporates advanced cooling solutions, ensuring optimal thermal management during prolonged use, which is vital for maintaining hardware longevity.

Both models come with ample storage options, featuring solid-state drives (SSD) that offer rapid data access times and improved overall system responsiveness. With multiple connectivity options, including USB 3.0, HDMI, and Ethernet ports, users can easily connect to peripherals and networks, enhancing their overall experience. Furthermore, the systems are equipped with high-speed Wi-Fi capabilities, ensuring that users stay connected with minimal latency.

User-friendly interfaces and system expansion capabilities are also key characteristics of these models. Whether upgrading the RAM or adding extra storage, Desa Tech has designed these systems with ease of maintenance in mind. The stylish, compact form factor of both devices ensures they fit comfortably in any workspace without compromising on performance.

Overall, the Desa Tech PC3460LP and PC4670LP are excellent choices for those seeking reliable, high-performance computing solutions. Their blend of powerful technologies, efficient designs, and user-centric features makes them suitable for a wide range of applications, from everyday tasks to demanding computational workloads.
Top Page Image Contents